Thread Rating:
  • 9 Vote(s) - 2.78 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Airbag warning fault P1F40 B106f
#1
Hi all,

Hope someone can help as my this has failed my MOT.

I have the fault codes P1F40 (unknown code) and B106F (passenger airbag no moving device fault: local, no characteristic)

I have tried cleaning both the connectors under the seat and also the orange connector going into the pretensioner, I've also had a mess with the wire going into the seat belt it's self.

Anyone ever solved this problem or can point me to what these codes mean?

Thanks alot
Reply
#2
Don't forget the passenger side has a pretensioners as well. The air bag light might mean you have a Comms fault somewhere in your loom but a read with Lexia will be able to pin point it. :thumbsup:
2006 2.0hdi 600 with bench seat.  Cool
Reply
#3
Hi,

Thanks for the reply.

The thing is the passenger side doesn't have a airbag, the guy with the dianostic said it may say passenger meaning the driver???

There is no pretensioner on the passenger side, the seat folds up and nothing under.

I take it a lexia is what citreon have?

Thanks
Reply
#4
The passenger side should still have a pretensioner on the seat belt stalk even though no passenger airbag is fitted (mine does). It sounds odd that there's no wiring under the seat :-S

Lexia is Citroëns diagnostic tool.
Reply
#5
I didn't mention its a berlingo van, it's a fold up seat with storage under

I've been told even though its has no passenger airbag the harness is still there? And this may be faulty
Reply
#6
It's behind the plastic cover on the hand brake side. :thumbsup:
2006 2.0hdi 600 with bench seat.  Cool
Reply
#7
Ok I'll have a look, is it accessible or will it involve removing seats etc?
Reply
#8
There's two sunken screws holding the plastic in, remove them and you're in business. :thumbsup:
2006 2.0hdi 600 with bench seat.  Cool
Reply
#9
I'm pretty sure there isn't one, there isn't a wire going into the seat belt it's self like the drivers side.
Reply
#10
I'm presuming you are talking about the wire going into the seatbelt fastener? This is for the indication that your belt is fastened, nothing to do with the air bag.
The passengers side does not have one of these.:thumbsup:
2006 2.0hdi 600 with bench seat.  Cool
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
What to look for when buying?
Last Post: aneng
Today 03:54 PM
» Replies: 3
» Views: 32
clunking noise
Last Post: my mucker
Today 03:39 PM
» Replies: 0
» Views: 8
brake warning light
Last Post: my mucker
Today 03:05 PM
» Replies: 1
» Views: 38
Not a Berlingo but very intresting
Last Post: Mrleadfoot
Today 02:43 PM
» Replies: 0
» Views: 14
Boot box dimensions?
Last Post: Mrleadfoot
Today 02:29 PM
» Replies: 1
» Views: 194
Help needed have immobiliser fault and fan probl...
Last Post: Dennyboy
Today 10:21 AM
» Replies: 2
» Views: 108
After market cruise control
Last Post: cancunia
Today 10:13 AM
» Replies: 7
» Views: 572
TRAILER WANTED
Last Post: ffrenchie
Today 09:28 AM
» Replies: 2
» Views: 49
touchscreen firmware version
Last Post: manelux
Today 08:46 AM
» Replies: 2
» Views: 293
Newbie
Last Post: Andre
Today 08:29 AM
» Replies: 4
» Views: 64

[-]
Recent Visitors
Locations of visitors to this page