Thread Rating:
  • 6 Vote(s) - 1.83 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Alloys for 2006 mk2
#1
Hi all.

Im looking to get some alloys for my mk2 1.9 2006.

Ive been offered some which are from a citroen C5.

Does anyone know if they would fit ?

If not what do i need to look out for in regards to getting some alloys which fit my van.

cheers peeps.
Reply
#2
If you feel like expanding your horizon on wheel choice, I've got a set of spacers that I want to sell that can get more wheels to fit. Just throwing it out there before I make a proper advert with pictures and price.
4x108 65.1-73.1 10mm
Reply
#3
after some research ive found that things of importance are

bolts and spacing ie

4 x 108

and offset

15mm which has a compromise of around 7mm either way.

so am i right in saying even though alloys are listed as ford, peugeot etc they will fit my berlingo if 4 x 108 and within 7mm of the 15mm offset
[-] The following 1 user says Thank You to JAYJAYBEE for this post:
  • djfs69
Reply
#4
That is correct yes, PCD, offset are the main measurements. However, you can run into trouble trying to fit OEM wheels from, say Ford as mentioned, because the middle bit is smaller (bore) and the wheel won't go over it to reach the bolt holes. This is where spacers come in not just for spacing wheels. What if the bore is bigger? That will work, people have done it, just remember the wheel will no longer ride on the center ring but rather on the bolts. Some people find that discouraging others don't care.

http://www.wheelfitment.net/citreon
Reply
#5
If the centre bore is bigger you get spigot ring to fill the gap if you bye new after market alloy's to fit your berlingo most come with the spigot ring's to suite so will not run on the bolt's a very bad thing to do your wheel's or the bolt's will fail and may kill you or some one else
                                     Smile  It's too orangey for crow's It's just for me and my dog  Smile

                                                        Heart Heart Love a lot trust a few  Dodgy
 
                                                        

                                        
Reply
#6
(29-10-2014, 07:55 PM)Kokain Wrote:  That is correct yes, PCD, offset are the main measurements. However, you can run into trouble trying to fit OEM wheels from, say Ford as mentioned, because the middle bit is smaller (bore) and the wheel won't go over it to reach the bolt holes. This is where spacers come in not just for spacing wheels. What if the bore is bigger? That will work, people have done it, just remember the wheel will no longer ride on the center ring but rather on the bolts. Some people find that discouraging others don't care.

http://www.wheelfitment.net/citreon

cheers for that website link..really usefull.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Another seat belt question
Last Post: Peter Palmer
Today 07:05 PM
» Replies: 0
» Views: 7
600lx or 800lx
Last Post: terryd999
Today 05:16 PM
» Replies: 0
» Views: 14
Fuel rail pipe replacement
Last Post: Peter Palmer
Today 04:50 PM
» Replies: 3
» Views: 73
hi all
Last Post: Andre
Today 04:07 PM
» Replies: 1
» Views: 24
New Berlingo Auto Box - Anyone have one?
Last Post: CourierJim
Today 03:47 PM
» Replies: 7
» Views: 316
Tyre Change...old on front new on back
Last Post: CourierJim
Today 03:37 PM
» Replies: 11
» Views: 167
Is anyone buying a new car AFTER April 2017?
Last Post: CourierJim
Today 03:30 PM
» Replies: 7
» Views: 142
Slow starter (diesel)
Last Post: zedhead
Today 03:22 PM
» Replies: 13
» Views: 302
Are Mud Flaps the Answer ?
Last Post: berreke
Today 02:13 PM
» Replies: 13
» Views: 366
Insurance cost
Last Post: jonny705
Today 02:12 PM
» Replies: 3
» Views: 90

[-]
Recent Visitors
Locations of visitors to this page