Thread Rating:
  • 12 Vote(s) - 3.25 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Berlingo rear axle / trailing arm bearing replacement
#1
Hi all,

Could anyone help me with berlingo rear axle problems.... I have a 2001 (pre-face lift) and I finally managed to remove the axle (trailing arm bearings gone on both sides) but as I do not have a direct replacement as yet does anyone have info / advice on how to just change the bearings on the trailing arm? Are there any special tools involved etc?

Thanks in advance!
Reply
#2
The bearings ride on the axle stubs. If the bearings are gone your stubs will also be history. With care you should be able to remove and replace the bearings with hand tools and a block of hardwood, but for the stubs you will need serious kit.
Reply
#3
buy a recon axle and swap your bits over will be A LOT EASIER expect it to be a 2 day job tho i've just done mine finished it wednesday night started it at 8am on sunday spent all of sunday doing it monday night tuesday night and finished it wednesday night and i'm a full time mechanic with a few grands worth of tools and i struggled with proper tools cause every bolt was seized to the point of almost snapping or rounding off i changed every bolt for stainless item and shot blasted all the brackets and painted them
Reply
#4
2 days? we did ours in about 10 hours with basic tools, you must have went the long way round as none of my bolts were rusted/seized and i have a y-reg, clamp the brake flexi's, disconnect the pipes, jack the car up, remove the exhaust, support the rear beam remove the 2 bolts at the front, remove the 2 T50, lift the car even more, drop the axle on the floor, swap the axles, lower the car, redo all 4 bolts, connect the 2 brake pipes, release the unclamp the flexi's, put the exhaust on and bleed the brakes.

2 days for your own car? please, i'd expect u to drag it out for 2 days if it was a paying punter but 2 days for your own car suggests in inept mechanic!
MK1 Berlingo, Y-Reg 1.4 Petrol Now LPG Converted.
Reply
#5
shot blasting and waiting for paint to dry plus numerous cups of coffee over 2 days seems right to me
[-] The following 1 user says Thank You to trevp for this post:
  • Dave good
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Good Evening to you all.
Last Post: ron
Today 04:33 PM
» Replies: 7
» Views: 188
radio code
Last Post: my mucker
Today 03:56 PM
» Replies: 0
» Views: 9
New Berlingo Auto Box - Anyone have one?
Last Post: rubberrat
Today 01:30 PM
» Replies: 3
» Views: 186
Help needed have immobiliser fault and fan probl...
Last Post: Dennyboy
Today 01:02 PM
» Replies: 0
» Views: 27
BerlingoForum.co.uk moving over to BerlingoForum...
Last Post: Andre
Today 11:23 AM
» Replies: 2
» Views: 208
Lucas mechanic fuel pump - disassembly and timin...
Last Post: yanivh
Today 11:01 AM
» Replies: 0
» Views: 30
Head Light Bulbs
Last Post: Tree
Today 08:38 AM
» Replies: 32
» Views: 912
EGR solenoid
Last Post: silver-slug
Today 08:31 AM
» Replies: 19
» Views: 1427
ABS Modul
Last Post: brajomobil
Today 08:07 AM
» Replies: 2
» Views: 117
Speedo/milometer fault
Last Post: Gixxerguyk8
Today 12:28 AM
» Replies: 15
» Views: 1465

[-]
Recent Visitors
Locations of visitors to this page