[Brakes] Front brakes binding

[dumdum]

progress so far.
All lights off.
I've replaced the nearside front ABS sensor which IS also the speedo sensor as this is now all working.
problem is the disks are still getting really hot as if binding. Is it possible that just a few short journeys will sort it out and free them up.

Does anyone know where I might get access to a lexia. I live in Earl Shilton Leicestershire. I have a cheap OBD2 ELM327 interface for a laptop but not got any decent software for it other than basic stuff as freebies that came with it.

Is it possibly still the master cylinder being silly?

Did you ever consider that the abs can't calculate the speed correctly so it doesn't then broadcast speed on the can network, and this any abs sensor would have the same effect?? Done plenty of abs sensors in front lefts on many peugeots and on occasion the speedo can be shut down, but mainly it will still read as all three sensors remaining are easily available for speed measurement... Maybe the way yours failed prevented the abs ecu correctly reading speed, I'm glad you got it sorted but proclaiming that this is the speed sensor is incorrect and is specific to the way yours failed not pugs in general