11-06-2014, 10:04 AM
(This post was last modified: 11-06-2014, 10:10 AM by ATL_driver.)
Well last Thursday while driving through Thetford Forest at 6AM I came in collision with a young stag deer, not too much damage, lower half of bumper and a few bit of plastic under the car, behind the bumper etc
[Image: DEFA33CF-601C-417F-B03F-6A04253E0C1C_zpstuqwgcox.jpg]
[Image: 3B00FA15-F1D5-4EF7-8CCC-67807F796B71_zpslaphutei.jpg]
[Image: C6106D0F-47D7-482B-AE50-DFE92EB05B6A_zpsrcsr8cif.jpg]
so anyway, I think I got away lucky compared to a friend who the day before Avoided hitting a deer
[Image: 93025E1A-44B0-4DFA-AEDC-3EF168E4A999_zpsivlhfo00.jpg]
so yesterday, I set about changing the front bumper, I did this with wheels on and NO JACK,
[Image: 1EAB513F-D438-4A8F-BCBD-133C65D5667B_zpsruabqg9l.jpg]
half way through
then split the lower and upper halfs of the bumper
[Image: B8FBA378-A0FA-4872-AAA0-E160DEEB134B_zpshnlkzobe.jpg]
much better with its face back on, just need a new grille and it'll be as good as new.
[Image: 47D5EA41-2205-45C0-B53D-A958A6D54026_zpsrkuolfcs.jpg]
[Image: 09D1A2D3-54B4-4C5C-BCBD-3A14ABAD4C00_zps76fp7rsg.jpg]
so if anyone says you can't do it on it's wheels they haven't tried hard enough,
sorry I couldn't do a step by ctep, I was at work and was against the clock so to speak,
there is only 10mm bolts holding it on and the torx along the slam panel, 3 bolts under front end, 2 bolts either side for the white(in my case) bumper grille bit you'll need to remove inner arches for this and many easy to remove clips
[Image: DEFA33CF-601C-417F-B03F-6A04253E0C1C_zpstuqwgcox.jpg]
[Image: 3B00FA15-F1D5-4EF7-8CCC-67807F796B71_zpslaphutei.jpg]
[Image: C6106D0F-47D7-482B-AE50-DFE92EB05B6A_zpsrcsr8cif.jpg]
so anyway, I think I got away lucky compared to a friend who the day before Avoided hitting a deer
[Image: 93025E1A-44B0-4DFA-AEDC-3EF168E4A999_zpsivlhfo00.jpg]
so yesterday, I set about changing the front bumper, I did this with wheels on and NO JACK,
[Image: 1EAB513F-D438-4A8F-BCBD-133C65D5667B_zpsruabqg9l.jpg]
half way through
then split the lower and upper halfs of the bumper
[Image: B8FBA378-A0FA-4872-AAA0-E160DEEB134B_zpshnlkzobe.jpg]
much better with its face back on, just need a new grille and it'll be as good as new.
[Image: 47D5EA41-2205-45C0-B53D-A958A6D54026_zpsrkuolfcs.jpg]
[Image: 09D1A2D3-54B4-4C5C-BCBD-3A14ABAD4C00_zps76fp7rsg.jpg]
so if anyone says you can't do it on it's wheels they haven't tried hard enough,
sorry I couldn't do a step by ctep, I was at work and was against the clock so to speak,
there is only 10mm bolts holding it on and the torx along the slam panel, 3 bolts under front end, 2 bolts either side for the white(in my case) bumper grille bit you'll need to remove inner arches for this and many easy to remove clips
63 plate Berlingo working hard.....