Thread Rating:
  • 8 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Couple of quick (and obvious) Questions
#1
These are probably answered somewhere but I tried searching for service reset and reset and resetting to no avail.

2004 1.9 multispace

How do I reset the service interval display on the dash? I have no manual otherwise I'd look it up.

What is BSI reset which I've seen mentioned a couple of times?

Thanks

Malc
Reply
#2
Hi to reset service indicator I think you have to hold in the trip button while ignition is off and whilst still holding it in you switch on the ignition then there will be a countdown from ten to zero once it has finished counting down you may let go of the button.

I believe that is how I did mine so hope it works for you and regards to Bsi reset I believe the bsi is some sort of ecu and you follow that procedure when disconnecting or connecting battery. And also to clear electrical faults I believe. I am sure someone will be able to explain better than I have.
Reply
#3
(16-03-2012, 09:06 AM)crickleymal Wrote:  These are probably answered somewhere but I tried searching for service reset and reset and resetting to no avail.

2004 1.9 multispace

How do I reset the service interval display on the dash? I have no manual otherwise I'd look it up.

What is BSI reset which I've seen mentioned a couple of times?

Thanks

Malc

Try this

http://www.berlingoforum.co.uk/attachment.php?aid=27
Reply
#4
Try the BSI Reset procedure as this may cure your faults:

Put the driver's window down, lift the bonnet and ensure all equipment is switched off.

Ensure all doors are closed and remove key from the ignition.

Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.

Reconnect the vehicle battery, wait a further 10 seconds (do not open doors.).

Switch on the side lights through the driver's window.

Switch on the ignition and check system's functionality.

Hold lock button on key down for 10 seconds.

Remove key open & close door test central locking system.

Start the engine and complete the system's check.

Failure to follow this procedure could result in incorrect operation of
Reply
#5
(16-03-2012, 12:11 PM)muply Wrote:  Try the BSI Reset procedure as this may cure your faults:
Umm... What faults?

Quote:
Failure to follow this procedure could result in incorrect operation of

of what?

Thanks though. Procedure noted.
Reply
#6
Anything electical eg wiper locks lights
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
What to look for when buying?
Last Post: my mucker
Today 04:59 PM
» Replies: 7
» Views: 105
Next gen berlingo multispace
Last Post: doofer
Today 04:19 PM
» Replies: 17
» Views: 315
Taking along time to heat up/warm the cabin
Last Post: jj9
Today 10:57 AM
» Replies: 10
» Views: 199
Are Mud Flaps the Answer ?
Last Post: doofer
Today 10:01 AM
» Replies: 15
» Views: 478
Head Light Bulbs
Last Post: doofer
Today 09:51 AM
» Replies: 37
» Views: 1209
Help needed have immobiliser fault and fan probl...
Last Post: brajomobil
Today 08:54 AM
» Replies: 3
» Views: 134
New tablet fitted
Last Post: Andre
Today 08:31 AM
» Replies: 1
» Views: 65
January Picture of the Month Contest
Last Post: Andre
Today 08:22 AM
» Replies: 1
» Views: 131
1.6hdiTurbo Over Boost OBD code P0234
Last Post: berlingo16hdif
Yesterday 11:00 PM
» Replies: 11
» Views: 14496
Supermarket Diesel
Last Post: Silverberlingo
Yesterday 08:26 PM
» Replies: 6
» Views: 159

[-]
Recent Visitors
Locations of visitors to this page