Thread Rating:
  • 5 Vote(s) - 2.8 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cruise Control
#1
Right ive got everything in place the cc stalk, clutch and brake switches. ive taken my van to a small local citroen specialist and they've had it a day with this Lexia but still can not program it, they think the bsi is not compatable, anyone else had this problem. im not giving up till my van has cc
Reply
#2
anyone
Reply
#3
What does Lighty think? He'd probably be 70 miles each way, though.
Reply
#4
I have a 2.0 HDi Multispace of 2005 and found the clutch switch already fitted. The Siemens BSI was programmed by a Bolton auto electrician without any problems. I guess the fact that the clutch switch was already fitted suggests that CC was an option on my car. Perhaps the firmware on my BSI was programmed differently from yours (at the factory). From memory the BSI had to be amended in at least 4, possibly 6, areas. I now have my own Lexia kit and will run the software to check what needs to be altered if nobody else comes up with the answer.
Reply
#5
I seem to remember reading there are 3 different spec BSI's low spec standard spec and high spec There are 2 letters which denote which spec it is
Reply
#6
Not done one of these for ages, but you need to switch the CC on in the engine ECU as well as the BSI
Reply
#7
(07-08-2013, 09:39 PM)Lighty Wrote:  Not done one of these for ages, but you need to switch the CC on in the engine ECU as well as the BSI

Yes, this is correct of course, and I seem to remember it's called something other than cruise control in the engine ECU. Took me ages to find it to turn it off when I was troubleshooting earthing issues with the comms 2000.
Reply
#8
the clutch and dual brake switch were already fitted all ive done is fit cc stalk and lexia. gonna have a look on ebay for different bsi's

(01-08-2013, 05:20 AM)mikeB Wrote:  I have a 2.0 HDi Multispace of 2005 and found the clutch switch already fitted. The Siemens BSI was programmed by a Bolton auto electrician without any problems. I guess the fact that the clutch switch was already fitted suggests that CC was an option on my car. Perhaps the firmware on my BSI was programmed differently from yours (at the factory). From memory the BSI had to be amended in at least 4, possibly 6, areas. I now have my own Lexia kit and will run the software to check what needs to be altered if nobody else comes up with the answer.

So what is the part number of your bsi then, if its any different
Reply
#9
I add cruise control in friend 206 with mux.

What we did:
-connect clutch with BSI
-add throttle pedal with 4 pins
-upgrade BSI soft with PP2000 ( it also unlocked few new functions )
Partner Tepee 1.6HDI 92@115bhp / 17"aloys / -35mm H&R kit / MyWay upgrade
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Next gen berlingo multispace
Last Post: Jed Clampit
Today 08:49 PM
» Replies: 8
» Views: 121
TRAILER WANTED
Last Post: Silverberlingo
Today 08:21 PM
» Replies: 0
» Views: 15
glow plugs
Last Post: brodfather11
Today 08:03 PM
» Replies: 1
» Views: 49
Newbie
Last Post: Jed Clampit
Today 07:45 PM
» Replies: 1
» Views: 32
New Berlingo Auto Box - Anyone have one?
Last Post: Capelbond
Today 04:10 PM
» Replies: 9
» Views: 358
Finally a B9 Haynes Manual
Last Post: Satellitemark
Today 02:32 PM
» Replies: 37
» Views: 2409
Is anyone buying a new car AFTER April 2017?
Last Post: doofer
Today 09:10 AM
» Replies: 12
» Views: 245
Sop the seatbelt buckle sitting soo low?/aux ste...
Last Post: Hora
Today 07:04 AM
» Replies: 5
» Views: 163
Fuel rail pipe replacement
Last Post: polar
Today 06:54 AM
» Replies: 4
» Views: 107
600lx or 800lx
Last Post: dumdum
Yesterday 11:12 PM
» Replies: 1
» Views: 51

[-]
Recent Visitors
Locations of visitors to this page