Thread Rating:
  • 23 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Engine] 2.0 HDI Sump Pan..
#1
How hard a job is it to replace the DW10 sump pan? My sump plug is cross threaded and now leaking Sad (Compliments the PAS fluid leak nicely I suppose!)

Found this on Egay,I assume it'll fit my HDi Partner..

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?V...ink:top:en

This bloody van fights me every step of the way, so I think I'll end up throwing it at my mechanic :lol:
'04 Peugeot Partner HDi LX. Lows, Leaks and Wellers. Now matt grey and dent free Smile

Reply
#2
Why not do what I and others have done and replace it with one of these-

http://www.drainplug.co.uk/standard.html

Threadlock it in and be done
Reply
#3
That looks like great idea, many thanks Smile
'04 Peugeot Partner HDi LX. Lows, Leaks and Wellers. Now matt grey and dent free Smile

Reply
#4
Hi, there are two types of sump pan for the DW10 engine, one for a van with air con (cast aluminum with a 14mm drain plug) and a pressed steel one with a 10mm plug for non air con ones. The one pictured is the cast type hence the expense. If yours is the cast type it would be cheaper to remove it and take it to your local garage and get it heli coiled. (it's the same size as a spark plug thread).Confusedalut:
2006 2.0hdi 600 with bench seat.  Cool
Reply
#5
No A/C on mine so I assume it'll be a pressed steel job! Its just arkward now because the vans my only transport so I cant have it off the road for long. Just need to find out what size drain plug I need now...
'04 Peugeot Partner HDi LX. Lows, Leaks and Wellers. Now matt grey and dent free Smile

Reply
#6
I wrecked my thread about 12 to 18 months back and thread locked in the Femco drain plug and posted the alternative theory on here and it was a bit of an experiment at the time to see if it was a solution.... It's worked. no leaks and dropped the oil several times and no issues at all!!

Great product and if you use permanent thread lock, it stays in there!!

The alternative is helicoil. No need to fit a new sump.
Reply
#7
Why not just drive the vehicle to the local engine remanufacturer or engineering workshop, tell them what has happened, let them drop the oil and rethread the sump in situ????
Berlingo Multispace 2.0HDI '54 reg Mediterranean Blue
Reply
#8
Cost? It's probably £80+ to helicoil the sump and then oil change etc.. then it's need doing right so there's no crap left in the bottom of the sump.

Obviously much cheaper than replacing sump but for a bust thread it cost me £30 ish and then future oil changes are so simple with the drain plug.
Reply
#9
Sorry I didn't credit you Tucker. I couldn't remember who had the original idea that I also used.
[-] The following 1 user says Thank You to Coco for this post:
  • tucker
Reply
#10
You could always remove the sump your self and obtain a M10 x 1.25 fine, hand tap and just clean the thread up.
It's most likely it'll just be the start of the thread that will be crossed so it won't take much effort. You might need a new plug if thats damaged. Don't forget to use a new seal.
Part No. 0311 29 for the plug, 0313 40 for the seal.

One like this on Ebay, item No. 280878670815
Confusedalut:
2006 2.0hdi 600 with bench seat.  Cool
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
New Berlingo Auto Box - Anyone have one?
Last Post: rubberrat
Today 01:30 PM
» Replies: 3
» Views: 176
Help needed have immobiliser fault and fan probl...
Last Post: Dennyboy
Today 01:02 PM
» Replies: 0
» Views: 21
BerlingoForum.co.uk moving over to BerlingoForum...
Last Post: Andre
Today 11:23 AM
» Replies: 2
» Views: 203
Lucas mechanic fuel pump - disassembly and timin...
Last Post: yanivh
Today 11:01 AM
» Replies: 0
» Views: 29
Head Light Bulbs
Last Post: Tree
Today 08:38 AM
» Replies: 32
» Views: 903
EGR solenoid
Last Post: silver-slug
Today 08:31 AM
» Replies: 19
» Views: 1427
ABS Modul
Last Post: brajomobil
Today 08:07 AM
» Replies: 2
» Views: 114
Speedo/milometer fault
Last Post: Gixxerguyk8
Today 12:28 AM
» Replies: 15
» Views: 1460
Which wheel nuts?
Last Post: Stu999
Yesterday 11:50 PM
» Replies: 0
» Views: 57
VAN SECURITY
Last Post: ricc
Yesterday 08:29 PM
» Replies: 5
» Views: 178

[-]
Recent Visitors
Locations of visitors to this page