Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Engine] engine change not starting HELP
#1
Hi I'm new on here and was wondering if anybody could help, I'm in france and my injector pump stopped working. I had it recovered and the mechanic said it would be 1000 euros for a new one . I managed to buy another english van out here that has been in an accident but the engine runs fine for a 100euros . They are both 1.9 diesels with with lucas injector pumps the one I'm fixing is a multispace and the other one is a van.I've changed the engine as i thought this would be easier than changing the injector pump but when i went to start it it would not fire. i have fuel going to the injector pump and returning from the pump but no fuel going to the injectors.I presume its down to the solenoid in the injector pump or an immobiliser any help would be appreciated as I'm going back to England soon as I'm on holiday.
Thanks, Sam
Reply
#2
Hi Sam,

Depending on age it may have a immobiliser type solenoid on the pump, if it has it will have an armoured plate covering the solenoid.

If this is the case you will need to remove the pump and remove the armoured plate, you can then fit a standard solenoid doing away with the immobiliser or fit the solenoid from your old pump.

Do a search on this forum http://www.frenchcarforum.co.uk/forum/viewforum.php?f=3 for de-armouring rotary pump.
Reply
#3
(28-01-2015, 08:34 PM)polar Wrote:  Hi Sam,

Depending on age it may have a immobiliser type solenoid on the pump, if it has it will have an armoured plate covering the solenoid.

If this is the case you will need to remove the pump and remove the armoured plate, you can then fit a standard solenoid doing away with the immobiliser or fit the solenoid from your old pump.

Do a search on this forum http://www.frenchcarforum.co.uk/forum/viewforum.php?f=3 for de-armouring rotary pump.

Thank you for your reply I've done a search but no results is there any where eles i can look
cheers
Reply
#4
http://www.frenchcarforum.co.uk/forum/se...id%5B%5D=3

https://www.youtube.com/watch?v=LZN6X0RIQhY

Hope this helps.
Reply
#5
http://www.frenchcarforum.co.uk/forum/se...mit=Search
Reply
#6
thank you this is very helpful
Reply
#7
o.k after seeing the video about removing the armoured plate which seems like a lot of drama as I've got both vehicles how about changing all the relevant electrical components? would that be feasible and if so which components would I need to change and where are they?
Reply
#8
It the fuel stop solenoid out of the old pump you need to fit into the new pump.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Help needed have immobiliser fault and fan probl...
Last Post: brajomobil
Today 08:54 AM
» Replies: 3
» Views: 122
Next gen berlingo multispace
Last Post: doofer
Today 08:36 AM
» Replies: 12
» Views: 255
New tablet fitted
Last Post: Andre
Today 08:31 AM
» Replies: 1
» Views: 49
January Picture of the Month Contest
Last Post: Andre
Today 08:22 AM
» Replies: 1
» Views: 121
Taking along time to heat up/warm the cabin
Last Post: Lighty
Today 06:37 AM
» Replies: 8
» Views: 155
1.6hdiTurbo Over Boost OBD code P0234
Last Post: berlingo16hdif
Yesterday 11:00 PM
» Replies: 11
» Views: 14462
Supermarket Diesel
Last Post: Silverberlingo
Yesterday 08:26 PM
» Replies: 6
» Views: 146
2005 Berlingo
Last Post: len glover
Yesterday 07:23 PM
» Replies: 7
» Views: 125
clunky gear change
Last Post: Hora
Yesterday 05:23 PM
» Replies: 1
» Views: 59
Tyre Change...old on front new on back
Last Post: ricc
Yesterday 05:15 PM
» Replies: 13
» Views: 270

[-]
Recent Visitors
Locations of visitors to this page