Thread Rating:
  • 8 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fuel Cap Problems
#1
I got stuck at the garage the other day for 5 minutes trying to get the fuel cap to seat down properly and allow the key to turn to release it from the cap.
Has this happened to anyone else?
Is there a fix
or Am I going to have to buy a new fuel cap and put up with have a different fuel cap key.

Thanks in anticipation
Reply
#2
the locking part is easy to get out of sync with the cap body but it shouldnt be a krypton factor puzzle.
Turn the lock fully anticlockwise and then put the cap in fully seated.
Turn the whole assembly clockwise using the key.
Reply
#3
(16-07-2013, 06:50 PM)evdama Wrote:  the locking part is easy to get out of sync with the cap body but it shouldnt be a krypton factor puzzle.
Turn the lock fully anticlockwise and then put the cap in fully seated.
Turn the whole assembly clockwise using the key.

The problem appears to be the seating of the key release mechanism that allows the key to turn and be released from the cap. Some times it seats down correctly and at others it just refuses to do so. Wobbling the cap as it seats makes it better but does not cure it
Reply
#4
(16-07-2013, 07:57 PM)ouradventure Wrote:  
(16-07-2013, 06:50 PM)evdama Wrote:  the locking part is easy to get out of sync with the cap body but it shouldnt be a krypton factor puzzle.
Turn the lock fully anticlockwise and then put the cap in fully seated.
Turn the whole assembly clockwise using the key.

The problem appears to be the seating of the key release mechanism that allows the key to turn and be released from the cap. Some times it seats down correctly and at others it just refuses to do so. Wobbling the cap as it seats makes it better but does not cure it

Had the same problem myself. You're spot in if you look underneath the filler cap you'll find the little toggle (the key release mechanism) which prevents the cap from rotating if not pushed home enough. I now make sure that toggle is at the top when putting the cap in place then push the cap upwards a touch, the cap shuts easily then.

Cheers

Ian
2012 Berlingo XTR 110 in Iron Grey

Money cannot buy you happiness but it far better to cry in Ferrari than on a bicycle
Reply
#5
I find this happens on mine but only one way, so if you lift cap off neck, rotate cap 180deg, put back into neck & key turns ok.

Edit, just read Bigian's post a bit more carefully so yes that must be it, needs the 'bit' at the top. I never really looked though. If it don't go in one way I try it the other way & it does.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
What to look for when buying?
Last Post: aneng
Today 03:54 PM
» Replies: 3
» Views: 32
clunking noise
Last Post: my mucker
Today 03:39 PM
» Replies: 0
» Views: 8
brake warning light
Last Post: my mucker
Today 03:05 PM
» Replies: 1
» Views: 38
Not a Berlingo but very intresting
Last Post: Mrleadfoot
Today 02:43 PM
» Replies: 0
» Views: 14
Boot box dimensions?
Last Post: Mrleadfoot
Today 02:29 PM
» Replies: 1
» Views: 194
Help needed have immobiliser fault and fan probl...
Last Post: Dennyboy
Today 10:21 AM
» Replies: 2
» Views: 108
After market cruise control
Last Post: cancunia
Today 10:13 AM
» Replies: 7
» Views: 572
TRAILER WANTED
Last Post: ffrenchie
Today 09:28 AM
» Replies: 2
» Views: 49
touchscreen firmware version
Last Post: manelux
Today 08:46 AM
» Replies: 2
» Views: 293
Newbie
Last Post: Andre
Today 08:29 AM
» Replies: 4
» Views: 64

[-]
Recent Visitors
Locations of visitors to this page