Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Injector seals?!
#1
Hello again, still trying to get my head around the 'fuse 25' problem I had but I've also just found out that I need new injector seals, it might be a daft question but are they universal? I can't seem to find any for the 1.8d engine? is it going to be a special order from citroen themselves?

Thanks in advance

Dan
Reply
#2
The un-numbered small "washer" is the shimming washer and that's spec'd separately depending on pressure correction.

   

I'm presuming it's one of the numbered parts in this diagram. Correct?
[-] The following 1 user says Thank You to addo for this post:
  • handymandan
Reply
#3
Hello again Addo, All I know is that the 'small copper seals need to be replaced' there is a lot of diesel bubbling around the 3rd injector and a little bit on the 2nd but I presume it's best to do all 4 including changing the hoses etc? I'm not that mechanically minded you see but I like to try and gain as much knowledge as I can before a garage claims to me that I need a full engine rebuild (lol) . I'd guess that the part I need is either the number 2 or the number 4 (or both?) on the diagram you provided - after several phonecalls i've managed to finally find a place that's willing to do this job (even though I thought it wasn't a hard task) i'll try and get some more info today and post back what the guy says
Reply
#4
Just go to Citroen , give them your reg no /engine details, pay and thank the man.

Not sure how many washers the 1.8d has but while you have pulled the injector I would change all the washers.
[-] The following 1 user says Thank You to homeruk for this post:
  • handymandan
Reply
#5
Took it to a company called 'SIS' (specialized injection services) and he said that two of the injectors would need refurbing - the diesel was not leaking via the bottom as i thought but was leaking from below the top bolt and dribbling down making it look as though it was leaking from the bottom thread when it was not - anyway for £90 he's going to take two injectors out - refurb them and then replace all 4 seals anyway. I phoned a fair few garages and they all said 'no, I don't really touch injectors' and after trips to eurocarparts, GSF and citroen themselves I got no where in purchasing just the seals (unless I wanted a pack of 50 from citroen lol) but thanks for your help guys, no doubt in the near future i'll be posting some more issues i'll have

Dan
Reply
#6
Just a follow up, I had two of the injectors reconditioned and the leak has now stopped, although he did find a leak in the 'top casing of the throttle body' and to be fair I dont know how I didnt see it before - anyway its sorted now so a thank you to everyone

Dan
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
DV6C 9HL injector options
Last Post: KD305
Today 06:25 PM
» Replies: 4
» Views: 148
Phone call in progress
Last Post: Leonberger
Today 05:05 PM
» Replies: 0
» Views: 9
brake master cylinder
Last Post: BigVtwin996
Today 03:28 PM
» Replies: 2
» Views: 15
M49 wiper blades
Last Post: BigVtwin996
Today 01:40 PM
» Replies: 2
» Views: 22
Hello
Last Post: OMG
Today 01:11 PM
» Replies: 1
» Views: 54
Passenger seat warning light by pass
Last Post: Bluebottle
Today 11:37 AM
» Replies: 0
» Views: 16
How to identify knocking injector
Last Post: brodfather11
Today 10:35 AM
» Replies: 1
» Views: 30
Berlingo multispace Clockspring issue
Last Post: dvee50
Today 08:09 AM
» Replies: 0
» Views: 25
Dangel 4x4 rear brake discs
Last Post: dwr400
Today 05:00 AM
» Replies: 17
» Views: 9243
Dripping water
Last Post: Arfcollins
Yesterday 07:31 PM
» Replies: 11
» Views: 275

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK