[HOW TO] Change bulbs on Multi-function Display Unit
|
Posts: 498
Threads: 30
Thanks Received: 99 in 44 posts
Thanks Given: 40
Joined: Sep 2010
Location: Southend - On - Sea
Reputation:
4
16-10-2010, 10:00 PM
(This post was last modified: 17-10-2010, 08:21 AM by lemsworld.)
The illumination on my Multi-function Display Unit went dull so this is how i replaced the bulbs which by the end the results are clear to how much more lit up the Display Unit is by the end of this process
This took me 5 to 10 minutes
At the end of changing the bulbs you will need to set the clock and date
Tools needed:
Torx T20 to remove the Display Unit
Your fingers to carefully prise off the multi-function display surround from the facia (Unless you know another way)
Step 1:
carefully prise off the multi-function display surround from the facia
[Image: IMG_1327.jpg]
[Image: IMG_1328.jpg]
Step 2:
Undo the two Torx screws
[Image: IMG_1330-1.jpg]
Step 3:
Undo the plug on the back
[Image: IMG_1331.jpg]
Push the button on the top to release the lock arm
[Image: IMG_1332.jpg]
[Image: IMG_1333.jpg]
[Image: IMG_1334.jpg]
Step 4:
Remove the plug
[Image: IMG_1335.jpg]
Step 5:
These are the three bulbs on the back on the display unit
[Image: IMG_1336.jpg]
Turn the bulbs anti-clockwise to release
[Image: IMG_1337.jpg]
Posts: 498
Threads: 30
Thanks Received: 99 in 44 posts
Thanks Given: 40
Joined: Sep 2010
Location: Southend - On - Sea
Reputation:
4
Remove the old bulb
[Image: IMG_1338.jpg]
Step 6:
Fit the new bulbs where needed
[Image: IMG_1339.jpg]
[Image: IMG_1340.jpg]
Step 7:
Reattach the plug
[Image: IMG_1341.jpg]
and lift up the lock arm back to original position
[Image: IMG_1342.jpg]
[Image: IMG_1343.jpg]
Step 8:
Put the display unit back lining it up with the black notch to get it in the right place
[Image: IMG_1344.jpg]
put the two screws removed earlier back and tighten them
[Image: IMG_1346.jpg]
Step 9:
Put the display surround back by placing it over and pushing down until it clips back in
[Image: IMG_1349.jpg]
The following 26 users say Thank You to lemsworld for this post:26 users say Thank You to lemsworld for this post
• Andre, andrea, andy-womble, Big_Jim, Cherrie1888, chronyx, DiveTramp, Eizoox15, j90xxx, Korky, minimick, mrak, Mrrivers, Ol'Jeffers, philip, redan, RolyG, Shawks, Siontrack, Stevo, Tpeti, ulysses, Wakeskate, Wakou, wizard, Z650
Posts: 1,884
Threads: 147
Thanks Received: 388 in 254 posts
Thanks Given: 263
Joined: Sep 2010
Location: London
Reputation:
11
Great contribution, thanks a lot for the tut Lliam, i just hope more people come here so that they are able to use it.
The following 1 user says Thank You to Andre for this post:1 user says Thank You to Andre for this post
• Wakou
Posts: 31
Threads: 7
Thanks Received: 8 in 4 posts
Thanks Given: 0
Joined: Oct 2010
Location: Helensburgh, Scotland
Reputation:
0
Great pictures, don't need to do this yet but its good to know how. bigsacs
•
Posts: 30
Threads: 5
Thanks Received: 1 in 1 posts
Thanks Given: 0
Joined: Sep 2010
Location:
Reputation:
0
22-10-2010, 09:34 PM
(This post was last modified: 22-10-2010, 09:34 PM by Father Ted.)
Citroen (well PSA) dash bulbs seem to be very weak and prone to failure.
Each Citroen I have had to do dash bulbs on I have replaced with LED units for longer life.
Citroen (well PSA) dash bulbs seem to be very weak and prone to failure.
Each Citroen I have had to do dash bulbs on I have replaced with LED units for longer life.
•
Posts: 498
Threads: 30
Thanks Received: 99 in 44 posts
Thanks Given: 40
Joined: Sep 2010
Location: Southend - On - Sea
Reputation:
4
I will keep it in mind to get LED's next time. Thanks
•
Posts: 850
Threads: 52
Thanks Received: 82 in 67 posts
Thanks Given: 9
Joined: Sep 2010
Location: Kent
Reputation:
0
Thanks for the very useful guide, especially as this is on my "to do" list. Are LEDs available (if these are a better bet) as a straight swap?
2005 Berlingo Multispace 1.6i Desire (Iron Grey)
If everything seems to be going well, you have obviously overlooked something.
•
Posts: 8
Threads: 3
Thanks Received: 0 in 0 posts
Thanks Given: 0
Joined: Jan 2011
Location:
Reputation:
0
Thanks for that it's great to see it being done, 1 question as I'm a little this thick are they special bulbs or can they be bought at any car shop?
•
Posts: 1,884
Threads: 147
Thanks Received: 388 in 254 posts
Thanks Given: 263
Joined: Sep 2010
Location: London
Reputation:
11
You should be able to pick them up at any car shop. From memory, they are similar to these LINK. But you could always just take one into your local motor shop and they should be able to match them. No need to be paying more than 60-80p.
•
Posts: 1,709
Threads: 52
Thanks Received: 316 in 279 posts
Thanks Given: 87
Joined: Oct 2010
Location: Switzerland
Reputation:
5
Wow, nothing like pictures!! Thanks for the HOW-TO guide. BTW what year/model is that. Mine looks a bit different.
2010 Berlingo Multispace HDi 110 with FAP. Persamos green.
•
|
Users browsing this thread: 1 Guest(s)
|
Welcome
|
You have to register before you can post on our site.
|
Latest Threads
|
Dangel 4x4 rear brake discs
Last Post: dwr400
Today 05:00 AM
» Replies: 17
» Views: 9197
|
Dripping water
Last Post: Arfcollins
Yesterday 07:31 PM
» Replies: 11
» Views: 249
|
Hello
Last Post: Whitehartref
Yesterday 03:52 PM
» Replies: 0
» Views: 45
|
Dog guard / Luggage guard for M59 Berlingo / Par...
Last Post: Doc_Brown
Yesterday 09:16 AM
» Replies: 0
» Views: 42
|
Eolys low level
Last Post: Pat888
16-04-2024 08:14 PM
» Replies: 9
» Views: 203
|
Removing sticker residue
Last Post: ae3
16-04-2024 06:49 PM
» Replies: 10
» Views: 228
|
MyCitroen App
Last Post: Multispacer
16-04-2024 10:22 AM
» Replies: 5
» Views: 130
|
2009 berlingo 1.6 hdi EGR issues?
Last Post: evdama
16-04-2024 06:54 AM
» Replies: 2
» Views: 100
|
DV6C 9HL injector options
Last Post: shtu
15-04-2024 10:18 PM
» Replies: 3
» Views: 139
|
Advice on Fuel Pump Please
Last Post: magwych
15-04-2024 12:18 PM
» Replies: 0
» Views: 67
|
Recent Visitors
|
|
Hosting by
|
|
|