Bought my berlingo a couple of weeks ago, fitted 17 inch team dynamics, blacked out windows and fitted Hids.... Now wanting to lower it but unsure how far you can go. Not sure about springs for the front. And never done torsion bars. Has anyone got any info to help.
Hello Mark welcome to the forum
306 spring's or coil over's for the front now the rear could be a big job you have to remove the torsion bar's move them round on the splines to get them lower can be a pig of a job to get them out rusted in quite often are so the best way is to get px reconed axle from a place like Axle direct .com email firstname.lastname@example.org they will send you the recon axle and pick the old one up when you've done the job hope it's an easy one for you .
10-02-2016, 09:18 AM
(This post was last modified: 10-02-2016, 09:20 AM by micheldeman.)
Don't use axledirect as they are crap. I had 2 axles from them and both were gone within 2 years. And when you try to claim your warranty, they will ignore you. Don't go there, I have seen better reviews from IM axles.
The answer above is probably from someone with connections with axledirect.