Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sump leak
#1
Hi Guys

Has anyone ever had any success filling pin holes in a sump?
I have 2 tiny holes right at the front that seep oil very slowly in my 2006 1.9D
Reply
#2
You can repair it but the oil causes a problem.It has to be oil free.There are compounds around for the job.Is a new sump horribly expensive?
Strawberry flavoured windows  Dodgy
Reply
#3
(28-05-2016, 03:59 PM)ron Wrote:  You can repair it but the oil causes a problem.It has to be oil free.There are compounds around for the job.Is a new sump horribly expensive?

Not horribly expenive, you can get them for as little as £30 but I just changed the oil today and another 5 litres of that would add another £20 to the price.
I have purchased some epoxy metal weld so i will see how I get on with it, only cost £2 so has to be worth a go.
Reply
#4
(28-05-2016, 04:27 PM)kluch255 Wrote:  
(28-05-2016, 03:59 PM)ron Wrote:  You can repair it but the oil causes a problem.It has to be oil free.There are compounds around for the job.Is a new sump horribly expensive?

Not horribly expenive, you can get them for as little as £30 but I just changed the oil today and another 5 litres of that would add another £20 to the price.
I have purchased some epoxy metal weld so i will see how I get on with it, only cost £2 so has to be worth a go.
You'll need to drain oil & clean metal well for the epoxy resin to stick,so why not go for the new sump? You can put the oil back in if its new,just keep it clean.Just my humble opinion.
Strawberry flavoured windows  Dodgy
Reply
#5
Agree with Ron!!
Reply
#6
Had that with my old combo,new oil change then sump decided to leak,replaced sump and just put the old oil back,because the oil was only about a week old,
Reply
#7
The holes are high enough up the sump that Im confident that I can clean all the oil and crud from the area enough to get a good bond so I will give it a go before spending anymore cash and get back to you all.
Reply
#8
Wash the sump off with some brake wash first
Reply
#9
Funnily enough i bought some brake cleaner this morning Wink
Reply
#10
If it's a steel sump with pin holes you'll be chasing them! It's rust and will just go somewhere else within months id bet! You'll have to drain the oil anyway, just catch it and put it back in with new sump, brake cleaner will seep in the holes and then dilute the oil on the inside making it thinner and more prone to running out, enjoy your fruitful task, this is one occasion where do a job once do it right is very applicable
[-] The following 1 user says Thank You to dumdum for this post:
  • ron
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Next gen berlingo multispace
Last Post: Jed Clampit
Today 08:49 PM
» Replies: 8
» Views: 123
TRAILER WANTED
Last Post: Silverberlingo
Today 08:21 PM
» Replies: 0
» Views: 17
glow plugs
Last Post: brodfather11
Today 08:03 PM
» Replies: 1
» Views: 51
Newbie
Last Post: Jed Clampit
Today 07:45 PM
» Replies: 1
» Views: 34
New Berlingo Auto Box - Anyone have one?
Last Post: Capelbond
Today 04:10 PM
» Replies: 9
» Views: 359
Finally a B9 Haynes Manual
Last Post: Satellitemark
Today 02:32 PM
» Replies: 37
» Views: 2409
Is anyone buying a new car AFTER April 2017?
Last Post: doofer
Today 09:10 AM
» Replies: 12
» Views: 245
Sop the seatbelt buckle sitting soo low?/aux ste...
Last Post: Hora
Today 07:04 AM
» Replies: 5
» Views: 163
Fuel rail pipe replacement
Last Post: polar
Today 06:54 AM
» Replies: 4
» Views: 107
600lx or 800lx
Last Post: dumdum
Yesterday 11:12 PM
» Replies: 1
» Views: 51

[-]
Recent Visitors
Locations of visitors to this page