Thread Rating:
  • 3 Vote(s) - 1.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Towbar
#1
I want to get a towbar for my van. I've seen kits on eBay considerably cheaper than from Citroen.. It's a 2012 L1 but I am unsure as to what kit I need.. I'm assuming all the holes are there ready from factory, for me to bolt it on?
2006 Citroen Berlingo 1.9 D - 69 BHP
1994 Renault Clio 1.8 16v - 212 BHP
1993 Renault Clio 1.8 RSi - 110 BHP

"There is no replacement for displacement"
Reply
#2
got my bosal swan neck from motor factors £125 incl wiring kit, 6 bolts and half an hour and fitted, 1 hour later wiring done, no bumper cut,
Reply
#3
My dealer said to me that u cant install it yourself because the computer needs to be altered for a tow bar.
So I did it myself and it works fine Smile

Dont let the stealer pick your pocket for a towing bar and install an aftermarket one Wink
Just stick to a good brand like bosal, mounting holes are already there and there is a instruction plan with the kit.

For wiring kit check out 'ECS electronics'
Reply
#4
I found this on ebay.. Item no. 380843965828 will this fit a mk3? Its only to tow a small trailer max weight about 400kg..
2006 Citroen Berlingo 1.9 D - 69 BHP
1994 Renault Clio 1.8 16v - 212 BHP
1993 Renault Clio 1.8 RSi - 110 BHP

"There is no replacement for displacement"
Reply
#5
Thats flange towbar & universal wiring kit. I'd pay a bit more & get Bosal swan neck & certainly a specific wiring kit if you are diy'ing. Swan neck towbar looks much neater.
[-] The following 1 user says Thank You to Opensauce for this post:
  • Dip Stick
Reply
#6
Hi guys, brand new to this forum so I'm not sure if this is the right place to post it, I've just fitted a towbar to my berlingo van 2011, I've done the wiring as per fitting instructions, not the small bit I'm lost on is the 12v supply to the relay, I've ran a cable from front to rear and now reading some of the posts i didnt have to as there is a heavy white wire already there, Ive put a test on it but it's not live. Any reason why?
Reply
#7
Do you need to fit a fuse in the fusebox to enable the live to the rear ?
So where does this bit go then ?
Reply
#8
There is a 20 amp fuse that needs to be fitted in the under the bonnet fuse box
                                     Smile  It's too orangey for crow's It's just for me and my dog  Smile

                                                        Heart Heart Love a lot trust a few  Dodgy
 
                                                        

                                        
Reply
#9
(17-04-2014, 04:39 PM)Michel Wrote:  Dont let the stealer pick your pocket for a towing bar and install an aftermarket one Wink
Just stick to a good brand like bosal, mounting holes are already there and there is a instruction plan with the kit.

i agree totally with you about a dealer fitted towbar. When i went to get my new van they wanted something like £300 to supply and fit one. So went to the local motor factors and got a swan neck bosal one and wiring kit for around £120, fitted it ourselves in less than two hours, power was already there at the back to splice the relay into. All's been working fine from when it was fitted ten months ago.
Reply
#10
I've heard you have to buy the holes separately and they are not available from Citroen either !!!!
Berlingo Multispace 2.0HDI '54 reg Mediterranean Blue
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Taking along time to heat up/warm the cabin
Last Post: Johny555
Yesterday 11:13 PM
» Replies: 6
» Views: 122
New tablet fitted
Last Post: Washeymag
Yesterday 11:11 PM
» Replies: 0
» Views: 22
1.6hdiTurbo Over Boost OBD code P0234
Last Post: berlingo16hdif
Yesterday 11:00 PM
» Replies: 11
» Views: 14441
Supermarket Diesel
Last Post: Silverberlingo
Yesterday 08:26 PM
» Replies: 6
» Views: 129
2005 Berlingo
Last Post: len glover
Yesterday 07:23 PM
» Replies: 7
» Views: 120
Next gen berlingo multispace
Last Post: wildoat
Yesterday 06:24 PM
» Replies: 10
» Views: 229
clunky gear change
Last Post: Hora
Yesterday 05:23 PM
» Replies: 1
» Views: 49
Tyre Change...old on front new on back
Last Post: ricc
Yesterday 05:15 PM
» Replies: 13
» Views: 267
Mesh Bulkhead
Last Post: Jelevents
Yesterday 03:13 PM
» Replies: 3
» Views: 80
longitudinal roof rails
Last Post: Corker
Yesterday 02:48 PM
» Replies: 1
» Views: 69

[-]
Recent Visitors
Locations of visitors to this page