Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wiring for Hazard Lights
#1
Hi All,
Does anyone know which connector connects to the hazard light switch??
My berlingo is '08 1.4i no a/c or central locking.......
So i have 3 connectors which all fit the hazard switch.....Brown (6 wire ) Black (4 Wire) or Green (4 wire)??
A brown 6 wire was connected when i bought it ... but hazards werent working....
As previous owner has had the heater matrix replaced i believe console was put back together in a hurry and incorrect wires put into hazard switch.....
MY hazard switch only has 4 pins so i assume the black or green connector should be connected to it.......
Any help much appreciated as i dont want to cross any wrong circuits with the hazard switch and create new problems.....
Wire diagrams or wire  numbers also much appreciated!!!!!

Thanks


Attached Files Thumbnail(s)
   
Reply
#2
Hi Carman without stripping my car out according to the Haynes manual there are 3 wires going to the switch. The wiring is not colour coded you need to look on each wire for a number.
Pin 6 = wire numbered 232
Pin 1 = wire numbered 230
Pin 3 = wire numbered M230 this is the earth.
Hope this helps.
Are we there yet????? No we fecking ain`t  gggggrrrrrrr
Ex 1.6hdi van now 3 seater 1.4 multispace
Reply
#3
HI Tomcat3
Thanks very much for the info ...... much appreciated.
I was struggling to read those numbers on the wires.....and then........

It turns out Citreon/PSA have kindly made this  issue very easy to sort out .....
After days of looking up berlngo dash images i realized each switch has a different colour plastic molded on the back of it... And each connector block is molded from the same plastic......

SO A/C = brown orange moldings
Hazard Lights = black moldings
De-mister = white moldings
Central locking =  green moldings


I missed this because i only removed the hazard light switch (black)  and i dont have cental locking or A/C....
My berlingo is a  08/ 58 plate older model berlingo. Im not sure how far back this colour coding goes
but i hope this helps someone else in a jam someday!!!!!!!!!


Attached Files Thumbnail(s)
   
[-] The following 1 user says Thank You to carman for this post:
  • Tomcat3
Reply
#4
I never realised that , thanks for the tip Big Grin
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Next gen berlingo multispace
Last Post: Opensauce
Today 08:34 AM
» Replies: 1
» Views: 42
Sop the seatbelt buckle sitting soo low?/aux ste...
Last Post: Hora
Today 07:04 AM
» Replies: 5
» Views: 143
Fuel rail pipe replacement
Last Post: polar
Today 06:54 AM
» Replies: 4
» Views: 97
600lx or 800lx
Last Post: dumdum
Yesterday 11:12 PM
» Replies: 1
» Views: 41
Advise please on known problem tyre scrubbing
Last Post: shncoe1
Yesterday 10:12 PM
» Replies: 19
» Views: 1544
Is anyone buying a new car AFTER April 2017?
Last Post: Jed Clampit
Yesterday 09:25 PM
» Replies: 10
» Views: 199
Another seat belt question
Last Post: berreke
Yesterday 09:02 PM
» Replies: 1
» Views: 40
hi all
Last Post: Jed Clampit
Yesterday 08:39 PM
» Replies: 2
» Views: 47
Tyre Change...old on front new on back
Last Post: RocketVANman
Yesterday 08:26 PM
» Replies: 12
» Views: 205
New Berlingo Auto Box - Anyone have one?
Last Post: doofer
Yesterday 08:10 PM
» Replies: 8
» Views: 338

[-]
Recent Visitors
Locations of visitors to this page