Posts: 9
Threads: 4
Thanks Received: 0 in 0 posts
Thanks Given: 1
Joined: Nov 2011
Location:
Reputation:
0
Morning! Could anyone tell me how to get the number plate light lenses off on a mk2 Bingo with the big lift up type door? The 'manual' only shows the twin door type and talks about screws that mine doesn't have. Tried pulling and twisting, no joy. Thanks
•
Posts: 410
Threads: 28
Thanks Received: 68 in 50 posts
Thanks Given: 29
Joined: Jun 2011
Location: rotherham
Reputation:
0
30-01-2013, 04:12 PM
(This post was last modified: 30-01-2013, 04:12 PM by BerlingoHDI.)
There is a little cut out in the clear lens, just get a small screwdriver and prize off the lens . Refit by clipping back on, some people say you are required to strip internal panel off and faff about but i have never needed too.
Posts: 9
Threads: 4
Thanks Received: 0 in 0 posts
Thanks Given: 1
Joined: Nov 2011
Location:
Reputation:
0
BerlingoHDI, many thanks.
•
Posts: 1,882
Threads: 96
Thanks Received: 448 in 375 posts
Thanks Given: 709
Joined: Jun 2011
Location: nr. Glasgow, Scotland
Reputation:
1
As BerlingoHDI says, small screwdriver works well, although I find you get better leverage if you use a slightly bent screwdriver .
Former 2011 Mk3 XTR owner
alut:
•
Posts: 1,882
Threads: 96
Thanks Received: 448 in 375 posts
Thanks Given: 709
Joined: Jun 2011
Location: nr. Glasgow, Scotland
Reputation:
1
Thank god there was no post that mentioned finding the slot easier !!!!!
Former 2011 Mk3 XTR owner
alut:
•