Just doing a mk2 bingo xud9te conversion its not that hard ffs just make sure you have a full zx or 306 at hand I removed the mountingfrom the zx I used and re spot welded it to the inner wing in place of the bingo original and used all the zx driveshafts mounts ect the flywheel ive modified by removing the ring gear drilling two holes and cutting slots to fit the pick up lugs into the xu flywheel once fitted I popped the ring gear back bolted the crank sensor into the top off bell housing job done I used xu alternator and steering pump fitted dw oil coller and coolant pipes and thermostat housing ect all fits a treat ive also got a t25 turbo modified bosch pump 406 inlet and fmic so its also blistering fast..