Thread Rating:
  • 12 Vote(s) - 3.75 Average
  • 1
  • 2
  • 3
  • 4
  • 5
tomtom/satnav charging wire re-routing
#1
Well following advice and ideas in response to an earlier post of mine (thankyou very much) I've come up with a very simple solution to what to do with the charging wire from the cigar lighter to the satnav . Took me about 15-30mins. Tools required...a bent coat hanger.
The most difficult bit being to remove the plastic facia around the front digital display (the greatest difficulty being to summon up the courage to do it!) but even this turned out quite simple really.

I've attached some photo's that show the result.

Basically I removed the surrounding facia panel of the display and then removed the two torx screws securing the display (this procedure is fully documented with photo's in the useful hints/guides section in this forum). I then used a length of stiff wire(coat hanger) and pushed this up inside the plastic shroud etc up to the opening at the top. I attached the sat nav lead to the bottom of this wire and then pulled through. I refitted the display and then the surrounding facia(there is a neat little gap in the middle for the wire to sit). A little tip here...The facia panel responds very well to a good thump when refitting .

All looks good and has done away with the wire trailing up the front etc.Big GrinBig Grin


Attached Files Thumbnail(s)
           
[-] The following 2 users say Thank You to jobberwock for this post:
  • Andre, taxi
Reply
#2
A very big thanks to you for this, really invaluable to the community. Brilliant stuff.
Want Help with the Forum? Read Help Documents Here
 [Image: mybbsig.php]

[-] The following 2 users say Thank You to Andre for this post:
  • jobberwock, RolyG
Reply
#3
hehe looking good mate, thats what I did with mine too.
[-] The following 1 user says Thank You to Zion for this post:
  • jobberwock
Reply
#4
It might be good, I can't tell yet...

"Sorry we require 1 posts in order to download an attachment."
Reply
#5
(18-06-2012, 02:13 PM)Padski Wrote:  It might be good, I can't tell yet...

"Sorry we require 1 posts in order to download an attachment."
Reply
#6
I have the Mk3 EGS6 Multispace and everytime the engine stops in eco mode the 12v socket cuts out. Is there a way to get permanent feed for satnav or camera without hardwire to battery?
regards Alan
Reply
#7
in short, no, you'd have to bypass the Citroen System straight onto the battery, remember to Fuse it Close to the battery


charlie
63 plate Berlingo working hard.....
Reply
#8
Yes, there is a way to live wire a perm feed, I have done this very job and works well.

I took the feed from the thick white wire behind left panel in boot, routed wire under plastic moulding inside door, then behind right panel, up into plastic trim, in to roof liner, (bulky bit where side door roller track is hidden). Followed through to front of car, down behind windscreen trim then through, with a bit of fiddling into bottom of dash top glove box. I fitted a trailing socket plus a on/off switch and inline fuse.
Just thought it through for ages before building up courage to start job, using lengths of easily bendable stiff wire and sticky tape to feed through long lengths. On my XTR the dash top grille does not have a speaker so removing that made life easier.
All cable fully hidden and makes it possible to charge bits when parked out of sight.
Hope this helps.
Reply
#9
Top mark's jobberwock it's people like you that save us so much time  Cool
                                     Smile  It's too orangey for crow's It's just for me and my dog  Smile

                                                        Heart Heart Love a lot trust a few  Dodgy
 
                                                        

                                        
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Taking along time to heat up/warm the cabin
Last Post: Johny555
Yesterday 11:13 PM
» Replies: 6
» Views: 122
New tablet fitted
Last Post: Washeymag
Yesterday 11:11 PM
» Replies: 0
» Views: 22
1.6hdiTurbo Over Boost OBD code P0234
Last Post: berlingo16hdif
Yesterday 11:00 PM
» Replies: 11
» Views: 14439
Supermarket Diesel
Last Post: Silverberlingo
Yesterday 08:26 PM
» Replies: 6
» Views: 129
2005 Berlingo
Last Post: len glover
Yesterday 07:23 PM
» Replies: 7
» Views: 120
Next gen berlingo multispace
Last Post: wildoat
Yesterday 06:24 PM
» Replies: 10
» Views: 229
clunky gear change
Last Post: Hora
Yesterday 05:23 PM
» Replies: 1
» Views: 49
Tyre Change...old on front new on back
Last Post: ricc
Yesterday 05:15 PM
» Replies: 13
» Views: 267
Mesh Bulkhead
Last Post: Jelevents
Yesterday 03:13 PM
» Replies: 3
» Views: 79
longitudinal roof rails
Last Post: Corker
Yesterday 02:48 PM
» Replies: 1
» Views: 69

[-]
Recent Visitors
Locations of visitors to this page