serpentine belt routing

[03berlingo]

ok so serpentine/aux drive-belt/alternator belt/fan-belt snapped on Friday night haven't been able to get round to it but today got a belt gpk 1437 = wrong size:brickwall: so return it to the wholesalers and they apologise search my registration and give me a 1438 belt= still wont fit what do these numbers actually mean ie is the belt 1438mm long ? and secondly could someone tell me where to get some routing diagrams for the belt just in case im not doing it right don't know also anyone kno if this is actually the right size of belt?

Diesel 1.9d non-turbo mkII 03 plate cant provide any more info

Help would be highly appreciated as its my daily driver thanks.

[Tomcat3]

Not sure on correct belt but this diagram may be of some help.
http://www.google.co.uk/imgres?imgurl=ht...A&dur=3450

[03berlingo]

Not sure on correct belt but this diagram may be of some help.
http://www.google.co.uk/imgres?imgurl=ht...A&dur=3450

thanks for that the one at the bottom left hand corner was the way I was fitting it but its far too short

[ron]

If you route them wrong they can appear too short.Believe me,I've done it.alut:

[03berlingo]

If you route them wrong they can appear too short.Believe me,I've done it.alut:

I was thinking that tbh but cant find any other way of routing it I deal with hvac systems so am well used to playing with belts and pulleys

[Rustscrat]

If you route them wrong they can appear too short.Believe me,I've done it.alut:

I was thinking that tbh but cant find any other way of routing it I deal with hvac systems so am well used to playing with belts and pulleys

If you P/Mail me your Vin No. I'll dig out the correct part No. for your van.

[03berlingo]

If you route them wrong they can appear too short.Believe me,I've done it.alut:

I was thinking that tbh but cant find any other way of routing it I deal with hvac systems so am well used to playing with belts and pulleys

If you P/Mail me your Vin No. I'll dig out the correct part No. for your van.

Thanks Everyone For Your help got the thing sorted turns out the belt should actually be a 6pk 1447 Not a 143-7/8!!!! but there we go amazingly it was a 6pk 1438 that came off and snapped must have been forced on right enough whoever had done it used something akin to a crowbar to force the damn thing on and mangled the idler pulley while they were at it so one (correct size) belt and new idler pulley later Sorted :woop:

       

[adam3rdcanvey]

If you route them wrong they can appear too short.Believe me,I've done it.alut:

I was thinking that tbh but cant find any other way of routing it I deal with hvac systems so am well used to playing with belts and pulleys

If you P/Mail me your Vin No. I'll dig out the correct part No. for your van.

Thanks Everyone For Your help got the thing sorted turns out the belt should actually be a 6pk 1447 Not a 143-7/8!!!! but there we go amazingly it was a 6pk 1438 that came off and snapped must have been forced on right enough whoever had done it used something akin to a crowbar to force the damn thing on and mangled the idler pulley while they were at it so one (correct size) belt and new idler pulley later Sorted :woop:

Thankyou great feedback! Keeps the forum active and informed alut:

[03berlingo]