Berlingo Forum

Hi.
Have a '97 1.9D Berlingo.
Am after the wiring from the ignition switch: Cabling, a plethora of white and red, runs to three twin-pin 'plugs' - one black, one brown and one grey: Can someone identify these cables please? (The wiring diagrams I have located are very sparce when it comes to cable colours, and none of the cables have number 'markers').

Many thanks
Jon

Black connector is from battery (fused) Pin1 and signal to starter Pin2
Grey connector Pin1 supplies mirrors, radio, eleccy windows, wash/wipe, central locking(?) etc
Grey connector pin2 supplies reversing lights, engine fan, ciggie lighter, air bag, brake lights, instruments panel, indicators etc
Brown Pin2 heater blower


Ignition switch positions (0 - off, 1 ancillary, 2 ignition, 3 start)

Black pin1 is battery permanent for black and browns
Black pin2 is starter position only (position 3)
Brown pin1 is position 1 and 2
Brown pin2 is position 2 and 3
Grey pin1 is permanent supply for grey only
Grey pin2 is position 2

Many, many thanks for that - The 'old shed' (quite attached to it, really!) should now soon be back where it belongs - on the road.