Berlingo Forum
Alloys - Printable Version

+- Berlingo Forum (https://www.berlingoforum.com)
+-- Forum: Berlingo Chat (https://www.berlingoforum.com/forum-6.html)
+--- Forum: Tuning and Styling (https://www.berlingoforum.com/forum-17.html)
+--- Thread: Alloys (/thread-12090.html)



Alloys - Asnew99 - 23-07-2015

Hi new to the site but had a berlingo for few years now and love it. I no a lot have put posts about alloys but I want to start doing a few bits for mine so I am looking at alloys so Would like some help from you top lads. I am looking at some pug 407 sw 17" alloys so will these fit my 2009 1.6hdi berlingo van? Will I need new wheel bolts or can I use old ones and if so where would I get some from. If theses wheels won't fit could you advise me which ones will I just don't want to spend a fortune. I really look forward to some help from you berlingo guys


RE: Alloys - Trevor - 23-07-2015

Hi and welcome to the site

I have no experience about which alloys might fit but I do know that you will need new wheel bolts, reason? the alloys are usually much thicker so longer bolts are required to ensure you get a good bit of thread into the hubs.


RE: Alloys - Asnew99 - 23-07-2015

Hi Trevor thanks for that what does that at the bottom mean about the grey xtr 2012 sorry if it's a stupid question


RE: Alloys - Trevor - 23-07-2015

There used to be a separator line there but it went during a forum update I think. It just a way of telling others which Berlingo we own, it's useful when asking a question on here as it saves asking the poster later.


RE: Alloys - finny - 23-07-2015

407 wheels are 5 stud, berlingo 4 stud, most 4 stud off later Peugeot citroens will fit, you will also need the genuine bolts


RE: Alloys - Asnew99 - 23-07-2015

(23-07-2015, 04:56 PM)finny Wrote:  407 wheels are 5 stud, berlingo 4 stud, most 4 stud off later Peugeot citroens will fit, you will also need the genuine bolts

Thanks finny for the help much appreciated so if I looked for some say pug 306 and get 4 stud with the bolts I should be ok.......cheers


RE: Alloys - finny - 25-07-2015

if yours is the same as my van in my pic I would go for pug 307 308 or citroen c3 c4 ds Picasso, early pug/cit are et 18 which is ok later stuff 25/27, my bolts were 2nd hand from ebay off a 206


RE: Alloys - Mr_g - 16-08-2015

What alloys are they finny


RE: Alloys - finny - 17-08-2015

(16-08-2015, 10:42 PM)Mr_g Wrote:  What alloys are they finny


genuine citroen picasso krakatoas in 18", was a set on ebay recently and they do come up every now and then, heres the link, not sure if he actually sold them or listing just run out


 
http://www.ebay.co.uk/itm/CITROEN-LOW-PROFILE-WHEELS-TYRES-/191637861373?pt=LH_DefaultDomain_3&hash=item2c9e81b3fd


RE: Alloys - Mr_g - 18-08-2015

Thanks for reply still on std suspension? Been looking for a while and as soon as I saw your van I Kew they were what I wanted