+- Berlingo Forum (https://www.berlingoforum.com)
+-- Forum: Specific Model Chat, Problems and Faults (https://www.berlingoforum.com/forum-8.html)
+--- Forum: B9 Second Generation (https://www.berlingoforum.com/forum-10.html)
+--- Thread: Modutop rails (/thread-14325.html)
Modutop rails - andy-M - 29-09-2016
Hi any idea how to mount
1)box
2)sky attached
to this stupid rails ..they are curved and really low (close to the card roof)
Any of You ever mount skies to modutop crossing rails
Thx for any hints
Wysłane z mojego SM-G925F przy użyciu Tapatalka
Modutop rails - andy-M - 29-09-2016
[Image: 4c3b2494a5c16b829715f7ecc76cfee3.jpg]
Wysłane z mojego SM-G925F przy użyciu Tapatalka
RE: Modutop rails - Luis Rosa - 30-09-2016
Although I share the same roof rails on my Pug partner, I never assembled them this way, even knowing it was possible...I had a PUG 307 SW station previously, and the roof bars I had for this one, also fit the Partner, so I used the old bars on top of the ones that are in the modutop, the assembly stays a bit higher in the end.
The roofbox connectors for the roofbox I have, hold on to the rails with big screw in metal fixation hooks, and from what I see from your picture, my roofbox (G3, http://www.g3spa.it/en/) would fit nicely with the roofbars mounted like you have them in the picture. In fact it will not matter if the roofbar is curved, as long as it is tightly fitting to the mount points.
I never tried taking skys though.
RE: Modutop rails - andy-M - 03-10-2016
Correct sorry for mistakes ..it's cheaper I guess to buy additional bars .thx
Wysłane z mojego SM-G925F przy użyciu Tapatalka