+- Berlingo Forum (https://www.berlingoforum.com)
+-- Forum: Berlingo Chat (https://www.berlingoforum.com/forum-6.html)
+--- Forum: General Chat (https://www.berlingoforum.com/forum-7.html)
+--- Thread: Shark Fin Aerial (/thread-3468.html)
Pages:
1
2
Shark Fin Aerial - mookie - 23-08-2012
Does anyone have a shark fin aerial on your blingo? If anyone has could you please post a pic??
Thank you
RE: Shark Fin Aerial - BerlingoHDI - 23-08-2012
I second that, I seen a red one on eBay and thought it would look good on roof at back but still unsure
RE: Shark Fin Aerial - j90xxx - 23-08-2012
One on mine.
(But it's pretend. Shh.) :whistle:
Would imagine a proper one would work, but not as good as a rod aerial.
(Those tiny bee-sting aerials weren't up to much.)
There are cheap (ish) ones for sale on fleabay.
I put a pretend one on mine as the previous owner had a flashing beacon on the roof and left a hole with a sealing grommet.
This covers it perfectly. :thumbsup:
[Image: 34t8htd.jpg]
Same seller as mine, but this is a working one.
http://www.ebay.co.uk/itm/SMALL-WORKING-BLACK-SHARK-FIN-AERIAL-SAAB-AUDI-BMW-/400316368058?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d34b704ba
RE: Shark Fin Aerial - Andre - 23-08-2012
Martin to the rescue again. Took the ariel off just to give a better idea to those interested. (Click the image below).
[attachment=676]
(P.S Martin, owe you a couple of overdue PM's if they are still any use :thumbsup: ).
RE: Shark Fin Aerial - j90xxx - 23-08-2012
Ahhhhhhh!!!
Andre has butchered my van!
Pinched me aerial, he has. :eek:
Put it back, put it back now.
My van has been violated...
RE: Shark Fin Aerial - j90xxx - 24-08-2012
Andre, can you turn my steel wheels into 17" alloys and my bank account into positive numbers?
RE: Shark Fin Aerial - hachiroku - 26-11-2012
instead of starting a new thread I thought I'd add to this one...
The aerial is getting battered each time I move the car in/out of my garage (very low garage door! and aerial never lies completely flat), I assumed it would unscrew but after attacking it with a pair of pliers all I have managed to do is mash up the plastic outer!
It should unscrew right?
If not, then I may look into a shark fin aerial...
RE: Shark Fin Aerial - Tomcat3 - 26-11-2012
Yes they do unsrew, but if they aint been removed for ages they tend to seize up. Get a grip of the base so it dont move and try turning the aerial back and forwards It may let go in the end. Try to get some plus gas or similar in the joint. I replaced mine with a 300mm aerial.
RE: Shark Fin Aerial - hachiroku - 26-11-2012
I have some Plusgas, think I'll spray some on it now and leave it to work whilst I have me dinner :-)
I thought it unscrewed, thanks for confirming.
RE: Shark Fin Aerial - hachiroku - 26-11-2012
nope, it's properly stuck, all I succeeded in doing was turning the whole aerial fitting on top of the roof :-(