Peugeot Partner Tepee (18 - Printable Version +- Berlingo Forum (https://www.berlingoforum.com) +-- Forum: Berlingo Chat (https://www.berlingoforum.com/forum-6.html) +--- Forum: Members' Berlingos (https://www.berlingoforum.com/forum-19.html) +--- Thread: Peugeot Partner Tepee (18 (/thread-7504.html) |
Peugeot Partner Tepee (18 - fazy - 16-08-2013 Hello guys i will show You my pug. maybe it is not berlingo, but still B9 So I will tell You what I did already: -upgrade alloy's from 15" to 17" 225/45/17 Vredestein Ultrac Sessanta ( 17x7.5J ET-29 From pug 3008) -tint window's on the back with foil 5% -add cruise control -add (box) center console -upgrade display to RNEG ( VIPNav/MyWay ) -add CB Radio -C-Quartz on the paint My pug is running on Valvoline oil 5W40, and K&N High Airflow Filter. It is 92HP hdi, as You will see on the picture, but soon i Will fix that -chip to 110-115HP -lower by H&R -steering wheel from pug 308GTI ( but my later, cause need also neew Airbag ) [Image: puziojpg_nnexaxp.jpg] [Image: felunjpg_xeqwpwh.jpg] [Image: P1100602j_xnqhhnw.jpg] [Image: 121029155_xxsaxaa.jpg] [Image: 201306261_nnexanx.jpg] [Image: navijpg_nheansq.jpg] [Image: Hamowniaj_nephxxs.jpg] RE: Pug Partner, Brother of Berlingo (17"alloy) - ron - 17-08-2013 Welcome Fazy. That's a nice looking Berlingo lookalike :whistle:We love hearing of peoples' mods.Have fun.:thumbsup: RE: Pug Partner, Brother of Berlingo (17"alloy) - nil by mouth - 17-08-2013 Fine looking motor :thumbsup: I fancied the sessantas , but price put me off illyme: are yours ms rated and do you use them all year round ? I just presume Polish winters are pretty harsh :eek: Nice reflections from paint :drool: RE: Pug Partner, Brother of Berlingo (17"alloy) - fazy - 18-08-2013 Yes, Winter in Poland are harsh, then I use Goodyear Ultra Grip +7 (195/65/15) on picture is seems like first snow Driving on summer tires is dangerous, and stupid. I bought Vredestein about £80 each. I'm small detailer so my car shine. Now is covered with C-quartz, paint after that have nice (glass) reflections, of course i polish it a bit before Now I'm trying to get H&R lower springs but in Poland is rly hard, and it cost a lot of money. My friend with is worlking in UK says he can bring it to me so will be nice. RE: Pug Partner, Brother of Berlingo (17"alloy) - fazy - 24-08-2013 Again changes Yesterday I finally chipped my pug ( now is about 110 hp ) Now is driving a little bit better than custom 110 from factory If I got the graph I will show You how it looks now Yesterday also courier visited me with my new springs H&R. Friend who is a Mechanic told me, this H&R looks better, than Eibach. Now i need to find some free time to mount it then next photo on the car. [Image: 201308231_nwhnqep.jpg] RE: Pug Partner, Brother of Berlingo (17"alloy) - eame64 - 24-08-2013 Looking good,wheels really suit it. Was the Myway upgrade expensive? RE: Pug Partner, Brother of Berlingo (17"alloy) - fazy - 24-08-2013 Upgrade to myway cost me about £250 RE: Pug Partner, Brother of Berlingo (17"alloy) - fazy - 28-08-2013 finally my pug get down -30mm front and -50mm rear Now I'm testing how it is on the road. More photos soon [Image: pugjpg_nwxnrpp.jpg] RE: Peugeot Partner Tepee (17"aloy & low susp.) - finny - 30-08-2013 much better, sits nicely and not to low, you pug looks really high especially at the back before springs, much higher than my lingo van. RE: Peugeot Partner Tepee (17"aloy & low susp.) - nil by mouth - 30-08-2013 Now that does look mint ! Vast improvement , money well spent sir alut: Clean :drool: |