Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Bingo needs a lexia
#1
Just picked up a new 64 plate Berlingo XTR to replace my 12 plate Pug Partner.  Main reason for change was Pug dealer ripped me off £380 (!) for an annual service & I vowed there and then never to buy another Pug.
Only issue with Bingo is lack of cruise control which I used all the time on the Pug, however dealer offered me £500 off and required parts (stalk and cowel) as part of deal.
As far as I can see the clutch has the switch and the throttle is the new 6 wire, so should be just plug and play to fit.
Only problem is I have no access to a Lexia - are there any members in the Midlands who can help ?  In fact happy to drive further afield if no one local can be found.  Have downloaded the 'instructions' from the forum so doesn't look like rocket science, just disappointed the supplying dealer wouldn't do it themselves.
Anyway can anyone help ?  PM your e-mail if possible.
Many thanks in advance
Reply
#2
Let me know if you dont have any luck on this forum.  I am also on the Peugeot forum with members who have  lexia/diagbox.  If need be I should be able to put you in contact with someone who can help you.  Just need your location and contact details to sort somethingout for you.
Malcolm
2001 1.9D Multispace.
Diagbox diagnostics in Northumberland.
Reply
#3
I'm Berks if you are really stuck.
Reply
#4
(25-01-2016, 08:27 PM)Col Wrote:  I'm Berks if you are really stuck.
Actually I'm in Slough around once a month so may yet work out - I'll be down in a couple of weeks so could drop in on the way home.  I'll let you know if I don't get any better offers !
Thanks for the message
Reply
#5
Yep OK. Slough is about 1/2 hr away (I'm J12 of M4)
Reply
#6
Hi all,
Is there a list of members that have software / interface and are willing to do small jobs like enable rd4 aux inputs etc ?
If not is the Peugeot kit comparable ?
Thanks
Mark
Reply
#7
(25-01-2016, 06:49 PM)Mr Keef Hi I had mine enabled yesterday by Mark Lightfoot hes based at Ilkeston only took about 45minutes and cost me £36.00 including vat Wrote:  Just picked up a new 64 plate Berlingo XTR to replace my 12 plate Pug Partner.  Main reason for change was Pug dealer ripped me off £380 (!) for an annual service & I vowed there and then never to buy another Pug.
Only issue with Bingo is lack of cruise control which I used all the time on the Pug, however dealer offered me £500 off and required parts (stalk and cowel) as part of deal.
As far as I can see the clutch has the switch and the throttle is the new 6 wire, so should be just plug and play to fit.
Only problem is I have no access to a Lexia - are there any members in the Midlands who can help ?  In fact happy to drive further afield if no one local can be found.  Have downloaded the 'instructions' from the forum so doesn't look like rocket science, just disappointed the supplying dealer wouldn't do it themselves.
Anyway can anyone help ?  PM your e-mail if possible.
Many thanks in advance
Reply
#8
(28-02-2016, 09:40 PM)Satellitemark Wrote:  Hi all,
Is there a list of members that have software / interface and are willing to do small jobs like enable rd4 aux inputs etc ?
If not is the Peugeot kit comparable ?
Thanks
Mark
Hi all,
I found the relevant thread sorry for the diversion

Mark
Reply
#9
(28-02-2016, 09:57 PM)robbo60 - cheers Robbo - no one has got back to me more locally so I might give him a ring Wrote:  
(25-01-2016, 06:49 PM)Mr Keef Hi I had mine enabled yesterday by Mark Lightfoot he Wrote:  Just picked up a new 64 plate Berlingo XTR to replace my 12 plate Pug Partner.  Main reason for change was Pug dealer ripped me off £380 (!) for an annual service & I vowed there and then never to buy another Pug.
Only issue with Bingo is lack of cruise control which I used all the time on the Pug, however dealer offered me £500 off and required parts (stalk and cowel) as part of deal.
As far as I can see the clutch has the switch and the throttle is the new 6 wire, so should be just plug and play to fit.
Only problem is I have no access to a Lexia - are there any members in the Midlands who can help ?  In fact happy to drive further afield if no one local can be found.  Have downloaded the 'instructions' from the forum so doesn't look like rocket science, just disappointed the supplying dealer wouldn't do it themselves.
Anyway can anyone help ?  PM your e-mail if possible.
Many thanks in advance
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
How to identify knocking injector
Last Post: Bizzy9
Today 09:02 AM
» Replies: 0
» Views: 8
Berlingo multispace Clockspring issue
Last Post: dvee50
Today 08:09 AM
» Replies: 0
» Views: 15
Dangel 4x4 rear brake discs
Last Post: dwr400
Today 05:00 AM
» Replies: 17
» Views: 9202
Dripping water
Last Post: Arfcollins
Yesterday 07:31 PM
» Replies: 11
» Views: 258
Hello
Last Post: Whitehartref
Yesterday 03:52 PM
» Replies: 0
» Views: 48
Dog guard / Luggage guard for M59 Berlingo / Par...
Last Post: Doc_Brown
Yesterday 09:16 AM
» Replies: 0
» Views: 43
Eolys low level
Last Post: Pat888
16-04-2024 08:14 PM
» Replies: 9
» Views: 204
Removing sticker residue
Last Post: ae3
16-04-2024 06:49 PM
» Replies: 10
» Views: 232
MyCitroen App
Last Post: Multispacer
16-04-2024 10:22 AM
» Replies: 5
» Views: 131
2009 berlingo 1.6 hdi EGR issues?
Last Post: evdama
16-04-2024 06:54 AM
» Replies: 2
» Views: 100

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK