Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Driveshaft Nut Torque? Mk1 2001.
#1
Hi all,


Seeing as I'm told they're the same from the bulkhead forward, does anyone happen to know what the driveshaft nut on my 2001 Pug Partner should be torqued up to?
I have a funny feeling I read somewhere, something crazy like 225lb/ft.

Cheers in advance Wink
Will
Reply
#2
(01-12-2014, 09:47 PM)madwelshman Wrote:  Hi all,


Seeing as I'm told they're the same from the bulkhead forward, does anyone happen to know what the driveshaft nut on my 2001 Pug Partner should be torqued up to?
I have a funny feeling I read somewhere, something crazy like 225lb/ft.

Cheers in advance Wink
Will

Mr Haynes, he say 320 Nm / 236 lbf ft

Only one setting in Berlingo manual.

Malcolm.
2001 1.9D Multispace.
Diagbox diagnostics in Northumberland.
Reply
#3
I've been told 320nm for M24 nuts and 245nm for M20.5 nuts.
Reply
#4
Cheers guys, much appreciated.
I'm guessing the bearings are the same, just a difference in the driveshaft nut size.
The bearing that was supplied to me going by my reg number, had the smaller nut, but my shafts have the bigger nuts.
All went together fine and there was no play in it, but now, after about 40 miles of use, I have a creaking noise when I rock the top of the wheel with the car on the ground and also sometimes when driving you can hear it.

Think I'm gonna have to pull the hub off again and check the bearing, even though it's a new one Sad
Reply
#5
Creaking noise cured. Happy again now Big Grin
Reply
#6
(03-12-2014, 10:05 PM)madwelshman Wrote:  Creaking noise cured. Happy again now Big Grin

You have not said what the creaking was please tell us smile 
                                     Smile  It's too orangey for crow's It's just for me and my dog  Smile

                                                        Heart Heart Love a lot trust a few  Dodgy
 
                                                        

                                        
Reply
#7
NO! CAN'T! WON'T! lol
Reply
#8
Oh, ok.
The wheel nuts weren't tight enough. When I put the wheel on last, I nipped them with my impact gun. I then tightened them as I would with any steel wheel to a decent tightness. Admittedly, I didn't and don't tend to torque them on any of my cars, but I've never had a problem with wheel nuts/bolts done up tight enough that I can still get them off at the side of the road with a standard T bar but not needing a power bar. This has never been a problem in the past, so I am a little surprised (and embarrassed!)
Reply
#9
Not to worry we've all done some thing like that except ( RON ) of course ??
                                     Smile  It's too orangey for crow's It's just for me and my dog  Smile

                                                        Heart Heart Love a lot trust a few  Dodgy
 
                                                        

                                        
Reply
#10
(05-12-2014, 09:56 PM)Jed Clampit Wrote:  Not to worry we've all done some thing like that except ( RON ) of course ??

No,my nuts are always tight.Couldn't bear to lose one. Wink Wink
Strawberry flavoured windows  Dodgy
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Service interval notice
Last Post: jocas74
Today 02:23 AM
» Replies: 7
» Views: 358
Winter Tyres
Last Post: geoff
Today 12:19 AM
» Replies: 0
» Views: 16
23 plate Citreon Berlingo classed as a van
Last Post: W Petsa
Yesterday 10:39 PM
» Replies: 2
» Views: 34
The creation of my personal solo-travellor.
Last Post: EM58
Yesterday 06:17 PM
» Replies: 12
» Views: 740
M59 Throttle pedal
Last Post: evdama
Yesterday 01:10 PM
» Replies: 5
» Views: 178
Berlingo 2007 1.6 hdi - intermittent sticky acce...
Last Post: Romahomepete
Yesterday 01:05 PM
» Replies: 7
» Views: 329
roof rack with slats
Last Post: BigVtwin996
Yesterday 11:53 AM
» Replies: 4
» Views: 192
Battery upgrade
Last Post: evdama
27-03-2024 03:58 PM
» Replies: 0
» Views: 99
Wanted: 2003 M59 steering rack
Last Post: evdama
27-03-2024 12:45 PM
» Replies: 1
» Views: 57
Airbag Fault Code
Last Post: Cumbrian
26-03-2024 03:06 PM
» Replies: 1
» Views: 214

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK