My Partner Quicksilver edition - Printable Version +- Berlingo Forum (https://www.berlingoforum.com) +-- Forum: Berlingo Chat (https://www.berlingoforum.com/forum-6.html) +--- Forum: Members' Berlingos (https://www.berlingoforum.com/forum-19.html) +--- Thread: My Partner Quicksilver edition (/thread-10129.html) |
My Partner Quicksilver edition - Timon90 - 02-07-2014 Hi! Just wanted to show you my little pizzaracer.. Partner Quicksilver. Fitted a 1,816V from 306, 306 halfleather seats, and 405T16 wheels. Going to rebuild the rear beam and lower it, but wants to keep the sleeper look on it [Image: 20a8os0.jpg] RE: My Partner Quicksilver edition - P_e_a_R - 02-07-2014 Humm keep the way!! Those wheels are cool! Lower it =D We want pics of the seats!! RE: My Partner Quicksilver edition - ffrenchie - 02-07-2014 It's not got sliding rear doors, how old is it ? It certainly looks well used RE: My Partner Quicksilver edition - Timon90 - 02-07-2014 (02-07-2014, 08:31 AM)P_e_a_R Wrote: Humm keep the way!! I know. Never liked aftermarket rims. They are clean and looks good. Here's the seats. Messed around figuring out how to make the new brackets, but it became pretty good when finished. [Image: r0owie.jpg] (02-07-2014, 08:41 AM)ffrenchie Wrote: It's not got sliding rear doors, how old is it ? It certainly looks well used Sliding door on the right side Its a 2001. It's a bit beaten up, cause one of the previous owners rolled over with it But with a new mirror, it was good to go with only some small dents. But it has not got more than 147000 kilometres. RE: My Partner Quicksilver edition - Jed Clampit - 02-07-2014 I bet she move's well what about the corner's i think addo as done a how to on the beam a lot of hard work you mite do better to get a rebuilt or new beam then it will be easy to adjust to the hight you need alut: RE: My Partner Quicksilver edition - Gadgetman - 02-07-2014 147K Kms? (91K miles) That one's barely broken in... RE: My Partner Quicksilver edition - Timon90 - 02-07-2014 (02-07-2014, 08:58 PM)Jed Clampit Wrote: I bet she move's well what about the corner's i think addo as done a how to on the beam a lot of hard work you mite do better to get a rebuilt or new beam then it will be easy to adjust to the hight you need alut: I hope the beam is not completely rubbish, cause of low km, and the wheels is'nt leaning. Have orderet a new set of bearings, along with tubes. Goal is to kill the problem, before the problem kills me! (02-07-2014, 09:25 PM)Gadgetman Wrote: 147K Kms? I know...the best thing: I GOT THE CAR FOR FREE. Needed only to pay the tax, and of course replace the engine. Think it can be a fun ride when finished:thumbsup: RE: My Partner Quicksilver edition - P_e_a_R - 04-07-2014 The seats are awesome. But aren't they too much low? RE: My Partner Quicksilver edition - Timon90 - 04-07-2014 No, they are rised ca 10cm, to the same hight as the old ones. |