+- Berlingo Forum (https://www.berlingoforum.com)
+-- Forum: Specific Model Chat, Problems and Faults (https://www.berlingoforum.com/forum-8.html)
+--- Forum: B9 Second Generation (https://www.berlingoforum.com/forum-10.html)
+--- Thread: heater control bulbs (/thread-10825.html)
heater control bulbs - jonathan - 18-11-2014
does anyone know how to change the Heater Fan Control Bulbs for Citroen Berlingo mk3 2009 fan speed bulb has gone out cheers
RE: heater control bulbs - Opensauce - 18-11-2014
I did this on mine, thread here its a bit of a faff but using 10mm socket as described was easiest way without taking too much apart.
Edit to add, new forum workings won't let me link to it, I will do a bit of cut & paste for you.
RE: heater control bulbs - Opensauce - 18-11-2014
Here yer go, cut & paste from my previous thread about this. The picture is nicked off ebay, I did not remove panel on mine as it would involve disconneting heater cables
[Image: kgrhqm10.jpg]
The brown bits are the bulb holders, standard items that take capless 286 bulbs. Pull out cubby hole above panel by inserting both hands & pushing down & back. Using a 10mm hex socket with a blob of blutack in to stop holder dropping out I was able to to remove holders, replace bulbs & replace holders with the aid of a small inspection mirror.
RE: heater control bulbs - Opensauce - 18-11-2014
There you go Jonathon, I have bumped my old thread now, 'Heater conrol panel bulb replace'.
RE: heater control bulbs - jonathan - 18-11-2014
(18-11-2014, 10:27 AM)Opensauce Wrote: There you go Jonathon, I have bumped my old thread now, Â 'Heater conrol panel bulb replace'.
thanks i will try to repair it soon cheers jonathan