Driver's window not working - Printable Version +- Berlingo Forum (https://www.berlingoforum.com) +-- Forum: Specific Model Chat, Problems and Faults (https://www.berlingoforum.com/forum-8.html) +--- Forum: M59 Berlingo (https://www.berlingoforum.com/forum-28.html) +--- Thread: Driver's window not working (/thread-17819.html) |
Driver's window not working - cancunia - 04-12-2018 My driver's side window decided to stop working, am not exactly sure when but it was fine the last time I used it a few days ago. Pressing the button has no effect at all, the passenger side is still ok. Has anyone seen this problem before, maybe there's a fuse just for that side. Any thoughts welcome. Thanks RE: Driver's window not working - polar - 04-12-2018 Cant remember how they are fused so you need to check all fuses. The wiring can break in the conduit from the a post to the door so check for power at the motor. RE: Driver's window not working - cancunia - 05-12-2018 My enigmatic or is that enigmatique window started working again last night. I can now hear a relay in the BSI clicking when I press the button which I couldn't hear in the morning. It was a bit cold when I set off, so maybe there was some ice stopping the window. Maybe it thawed out during the day, but I resisted the temptation to try it on the M62 just in case it only worked one way. In the evening I tried it so that I could pay for diesel at ASDA without getting out of the car. RE: Driver's window not working - cancunia - 25-01-2019 Yesterday evening the window went down when I paid for fuel at ASDA, then declined to go up again a couple of minutes later. I turned the ignition off, then turned the key back to 'aux' & the window went back up when I pressed the switch. After that I started the engine and drove off, while driving I tried the up switch a few times and could hear the relay in the BSI clicking which I couldn't hear before, so I'm guessing there's a dry or loose joint somewhere? I'll take a look at the wiring diagram today but thought I'd ask if there are any thoughts? Thanks RE: Driver's window not working - cancunia - 25-01-2019 A quick update and a request for some help. Both windows are now working 100% fine.... I've attached 2 files showing the wiring for the windows, they are quite different from the looks of things. Both are AFAIK for the M59 but the version (2) is for a later RPO, mine as it happens. Please can anyone try the window 'up' switches while the windows are closed and let me know what year your car is & if there's a relay 'click' from the region of the BSI? Mine only clicks when I try the driver's window. It may be because the drivers side has the 'one touch' feature although that only works going down. TIA RE: Driver's window not working - mikeyr - 25-01-2019 Just went out to try this as feel I owe you a few favours for your help on this forum. However, had forgotten that my poverty spec car has manual winders! D'oh! RE: Driver's window not working - cancunia - 25-01-2019 (25-01-2019, 03:05 PM)mikeyr Wrote: Just went out to try this as feel I owe you a few favours for your help on this forum. However, had forgotten that my poverty spec car has manual winders! D'oh! Oops! For the amount of times that I open & close my windows, a couple of manual winders might have been a better option. RE: Driver's window not working - jj9 - 25-01-2019 (25-01-2019, 01:27 PM)cancunia Wrote: . . . Please can anyone try the window 'up' switches while the windows are closed and let me know what year your car is & if there's a relay 'click' from the region of the BSI? Mine only clicks when I try the driver's window. Mine makes the same click from the BSI on the driver's window. I believe the one touch feature only works when the window is going down. https://www.berlingoforum.com/thread-16082.html . RE: Driver's window not working - cancunia - 26-01-2019 (25-01-2019, 01:27 PM)cancunia Wrote: Please can anyone try the window 'up' switches while the windows are closed and let me know what year your car is & if there's a relay 'click' from the region of the BSI? Mine only clicks when I try the driver's window. Bump! Thanks |