[Steering & Suspension] TRAILING ARM TOOL

[Steering & Suspension] TRAILING ARM TOOL - Printable Version

+- Berlingo Forum (https://www.berlingoforum.com)
+-- Forum: Specific Model Chat, Problems and Faults (https://www.berlingoforum.com/forum-8.html)
+--- Forum: M49 Berlingo (https://www.berlingoforum.com/forum-9.html)
+--- Thread: [Steering & Suspension] TRAILING ARM TOOL (/thread-19269.html)

TRAILING ARM TOOL - THE BADGE - 11-03-2020

Hi Chaps,
I am going to change the Trailing Arm Bearings, but as usual there is a special tool needed,
'the trailing arm removal tool' is available on ebay & costs about £130 - with postage,
has anyone got one of these tools that I could borrow/hire ?

I live near Dartford - SE London,
any info appreciated [Image: huh.png]

First Gen Berlingo, 1.9 Diesel, 600 kg.

RE: TRAILING ARM TOOL - jj9 - 11-03-2020

Do you have a link to the tool?

.

RE: TRAILING ARM TOOL - ffrenchie - 12-03-2020

Have a look at the youtube videos how to do it. Most use a home made puller using thick plate and some bolts.

RE: TRAILING ARM TOOL - jj9 - 12-03-2020

I think this is the tool ....

https://www.ebay.co.uk/itm/Peugeot-Citeron-Rear-Trail-Arm-Removal-Tool-Arm-Puller-Rear-Axle-Repair-Bearing/273359405955?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160727114228%26meid%3D4055286ac2364b96a34af349a0d39fe9%26pid%3D100290%26rk%3D1%26rkt%3D4%26sd%3D273359405955%26itm%3D273359405955%26pmt%3D0%26noa%3D1%26pg%3D2060778&_trksid=p2060778.c100290.m3507

The problem is that by the time you have identified the bearings as being a problem the axle pin that they sit on is knackered so there is little point in replacing the bearings.

.

RE: TRAILING ARM TOOL - Tomcat3 - 12-03-2020

That is a joke price for a couple of bits of flat bar and a few bolts, you could make one up in half an hour.

RE: TRAILING ARM TOOL - THE BADGE - 12-03-2020

Thanks for your replies,

I thought of making the tool myself, its just the 'cutout' shape on the rear plate which could be a problem,
I've also thought of making a drawing & asking a local engineering workshop if they could make one ?
And what it would cost.

RE: TRAILING ARM TOOL - THE BADGE - 12-03-2020

(11-03-2020, 07:56 PM)jj9 Wrote: Do you have a link to the tool?

.

Hi mate,
there's a couple of vids on youtube showing the tool,
or on ebay you can see it for sale, £140 though. [Image: angry.png]

RE: TRAILING ARM TOOL - jj9 - 13-03-2020

Yeah I've seen the video on youtube of the tool in use...

https://www.youtube.com/watch?v=rIzeAFpIs1M

In the video you can see that the axle pin has corrosion, the guy is cleaning the worst of it off with sandpaper.

If the pin is heavily rusted / damaged new bearings will be short lived.

.

RE: TRAILING ARM TOOL - jj9 - 28-07-2020

THE BADGE,
just seen your post selling the trailing arm tool, so you obviously got hold of one.

How did you get on with the job, were the axle pins ok?

.