+- Berlingo Forum (https://www.berlingoforum.com)
+-- Forum: Specific Model Chat, Problems and Faults (https://www.berlingoforum.com/forum-8.html)
+--- Forum: K9 Third Generation (https://www.berlingoforum.com/forum-57.html)
+--- Thread: Pollen filter (/thread-20664.html)
Pollen filter - Guanock - 03-03-2021
Hi fellow Berlingerers
I have just bought a 2018 BlueHDI 100 XTR, it has done a few miles and I am keen to check the pollen filters. I have looked at a lot of earlier model procedures and wondered if the K9 was any different and/or easier!
Any help would be appreciated.
Geoff
RE: Pollen filter - Guanock - 04-03-2021
OK Guys, I have answered my own question.
Simply removed the plastic panel beneath steering wheel.
With the aid of a torch I identified the cabin filter cover plate, which although a bit remote was easily removed.
I then used a very sharp pointed tool to hook first the top and then the bottom filter out.
I would say it took about 2 minutes.
Geoff
RE: Pollen filter - chrisl - 11-09-2021
I changed mine today funny enough, the panel beneath the steering wheel comes off and refits easily, I made a mistake by taking the side panel on the console off as well and it’s a bar steward to get back…