Search Results
|
Post |
Author |
Forum |
Replies |
Views |
Posted
[asc]
|
|
|
Thread: B9 2009 secret heating function?
Post: RE: B9 2009 secret heating funktion?
(24-01-2021, 04:25 AM)Zen_Speedmaster Wrote: Here's a twist, I retrofitted heated mirrors to my B9. The heater control panel didn't have the heated rear screen / mirrors button but I discovered... |
|
mark3 |
B9 Second Generation
|
34 |
22,171 |
10-02-2021, 02:56 PM |
|
|
Thread: anyone fitted hubcentric spacers
Post: RE: anyone fitted hubcentric spacers
you definitely need to locate the wheel properly on a spigot, i would see if you can get some normal spacers but with a register for the wheel to fit onto, relying on just the bolts is dangerous, i'v... |
|
mark3 |
B9 Second Generation
|
2 |
3,004 |
05-11-2020, 06:45 PM |
|
|
Thread: heavy fuel use
Post: RE: heavy fuel use
dodgy fuel gauge reading maybe, |
|
mark3 |
B9 Second Generation
|
13 |
2,785 |
18-08-2020, 11:11 AM |
|
|
Thread: New mirror...no threads in the holes?
Post: RE: New mirror...no threads in the holes?
i fitted a mirror from a breakers yesterday, they use self tapping screws in the original mirror, |
|
mark3 |
B9 Second Generation
|
2 |
775 |
26-07-2020, 03:37 PM |
|
|
Thread: Broken Spring
Post: RE: Broken Spring
as far as i know you are best replacing both springs at the same time, as the other spring is 9 yrs old it has more than likely become a bit weaker and this could cause your van to pull to one side if... |
|
mark3 |
B9 Second Generation
|
1 |
839 |
26-07-2020, 01:05 PM |
|
|
Thread: Petrol 1.6 - timing belt or chain?
Post: RE: Petrol 1.6 - timing belt or chain?
if its a chain i wouldn't bother touching it, they more than likely will outlast the engine unlike a rubber belt |
|
mark3 |
B9 Second Generation
|
9 |
4,720 |
21-06-2020, 11:14 AM |
|
|
Thread: Diesel Injectors - more bhp required
Post: RE: Diesel Injectors - more bhp required
(30-05-2020, 09:52 PM)Soarer Wrote: Hi All
I have a couple of vans, a 2012 Berlingo that I have a low Turbo Pressure issue with at the moment and a 2007 Partner which is running well again. Th... |
|
mark3 |
B9 Second Generation
|
4 |
1,554 |
31-05-2020, 07:02 AM |
|
|
Thread: Clutch problem
Post: RE: Clutch problem
(24-05-2020, 07:21 AM)Debis_1981 Wrote: Currently at 80k miles
sounds like a new clutch is needed, the rattle may be caused by a crack in the pressure plate, I had the same problem on an older ... |
|
mark3 |
B9 Second Generation
|
6 |
2,233 |
24-05-2020, 07:28 AM |
|
|
Thread: front caliper bolts
Post: RE: front caliper bolts
yes i have just ordered a 7mm x 3/8 drive hex socket from halfords, £4, so that's ok,
thanks |
|
mark3 |
B9 Second Generation
|
7 |
2,891 |
16-05-2020, 04:29 PM |
|
|
Thread: front caliper bolts
Post: RE: front caliper bolts
cheers, I thought so , now I need to get a 7mm hex drive. |
|
mark3 |
B9 Second Generation
|
7 |
2,891 |
16-05-2020, 03:47 PM |
|
|
Thread: front caliper bolts
Post: front caliper bolts
I am looking to replace the original front pads, I looked at a few threads and it said I need a t55 socket which I have, I removed the plastic caps on the caliper and the bolts have a 7mm hex bolt hea... |
|
mark3 |
B9 Second Generation
|
7 |
2,891 |
16-05-2020, 03:11 PM |
|
|
Thread: Is there a plug/bung missing?
Post: RE: Is there a plug/bung missing?
yeah mine is exactly the same as that, I would guess that its meant to be like that |
|
mark3 |
B9 Second Generation
|
3 |
1,414 |
20-04-2020, 04:40 PM |
|
|
Thread: B9 front middle seatbelt stuck.
Post: RE: B9 front middle seatbelt stuck.
well done for this, i had the same problem with mine being stuck, I had to brake really hard going to work one day, it was a few days later that 3 of us were going to go out when I discovered my belt ... |
|
mark3 |
B9 Second Generation
|
14 |
9,900 |
17-04-2020, 02:11 PM |
|
|
Thread: Adding usb to head unit
Post: RE: Adding usb to head unit
I just paired my phone to the head unit, no cables required, |
|
mark3 |
B9 Second Generation
|
2 |
1,203 |
12-04-2020, 07:11 PM |
|
|
Thread: LOCKING FUEL CAP FAULT
Post: RE: LOCKING FUEL CAP FAULT
hi, yes I had the same problem, I sprayed inside the keyhole with some spray on grease, I guess wd40 would help also, this seems to have solved mine ok for the last few months, just spray inside the k... |
|
mark3 |
B9 Second Generation
|
21 |
11,916 |
21-03-2020, 08:06 PM |
|
|
Thread: LOCKING FUEL CAP FAULT
Post: RE: LOCKING FUEL CAP FAULT
(21-03-2020, 07:43 PM)smith335 Wrote: Hi
Has any one else had trouble with there locking fuel cap?
i can some times unlock it no problem , but most the time its a real pita...
the key does n... |
|
mark3 |
B9 Second Generation
|
21 |
11,916 |
21-03-2020, 08:02 PM |
|
|
Thread: Foot rest next to clutch
Post: RE: Foot rest next to clutch
hi, yes i removed my footrest, its just a big lump of polystyrene, just pull back the carpet and carefully cut it away with a knife, the carpet goes back really well but not perfect, i used to hate ho... |
|
mark3 |
B9 Second Generation
|
9 |
5,095 |
26-01-2018, 07:19 PM |
|
|
Thread: top engine cover
Post: RE: top engine cover
(03-04-2017, 06:32 AM)Opensauce Wrote: That's the current engine. Looking on mine there appear to be clips to allow a cover to be fitted. Probably one could be ordered from Cit parts? Cover pro... |
|
mark3 |
B9 Second Generation
|
4 |
5,412 |
03-04-2017, 04:51 PM |
|
|
Thread: top engine cover
Post: top engine cover
hi everyone,
I have a 2014 berlingo van 1.6hdi, engine number JBEM0286120, I am after the top plastic engine cover and was wondering if anyone could give me the part number to suit this engine as the... |
|
mark3 |
B9 Second Generation
|
4 |
5,412 |
01-04-2017, 09:38 AM |