|
Search Results
|
| Post |
Author |
Forum |
Replies |
Views |
Posted
[asc]
|
| |
|
Thread: 2.0 hdi EGR valve CLIP - broken, how to bodge it?
Post: RE: 2.0 hdi EGR valve CLIP - broken, how to bodge ...
| (10-07-2022, 08:47 AM)cancunia Wrote: (10-07-2022, 07:36 AM)richard77 Wrote: (10-07-2022, 07:26 AM)oilyrag Wrote: Don't have one of these but have spent a lifetime bodging. From w... |
|
richard77 |
M59 Berlingo
|
5 |
1,328 |
10-07-2022, 09:41 AM |
| |
|
Thread: 2.0 hdi EGR valve CLIP - broken, how to bodge it?
Post: RE: 2.0 hdi EGR valve CLIP - broken, how to bodge ...
| (10-07-2022, 07:26 AM)oilyrag Wrote: Don't have one of these but have spent a lifetime bodging. From what I can glean from Youtube there's the possibility of removing the remains of the old cli... |
|
richard77 |
M59 Berlingo
|
5 |
1,328 |
10-07-2022, 07:36 AM |
| |
|
Thread: 2.0 hdi EGR valve CLIP - broken, how to bodge it?
Post: 2.0 hdi EGR valve CLIP - broken, how to bodge it?
| my 2.0 hdi EGR valve CLIP is half broken, how can I get it back on or bodge it?
Its the clip that holds the pipe to the EGR body
I dont have pincers! can I glue it, wrap it, modify a jubilee clip or ... |
|
richard77 |
M59 Berlingo
|
5 |
1,328 |
09-07-2022, 04:17 PM |
| |
|
Thread: How do you replace a Wing?
Post: RE: How do you replace a Wing?
| (08-07-2022, 07:45 PM)oilyrag Wrote: This might help ....https://www.youtube.com/watch?v=PJ1rWrFoItI
thats for the later model |
|
richard77 |
M59 Berlingo
|
2 |
576 |
08-07-2022, 09:28 PM |
| |
|
Thread: How do you replace a Wing?
Post: How do you replace a Wing?
| I've a new wing to put on.
I have the Haynes manual, but whats the easiest way to change the wing?
Will I need any new screws, or mastic etc? |
|
richard77 |
M59 Berlingo
|
2 |
576 |
08-07-2022, 03:07 PM |
| |
|
Thread: Sliding door handle not working - FLOPPY
Post: RE: Sliding door handle not working - FLOPPY
| its quite easy.
A new one is a couple of quid off ebay. ive got a spare one somewhere
Just knock the old one out with a hammer/pin punch, and knock the new one in |
|
richard77 |
M59 Berlingo
|
3 |
793 |
06-07-2022, 10:48 AM |
| |
|
Thread: Big Loss of Power 2.0hdi
Post: RE: Big Loss of Power 2.0hdi
| It turned out that the pipe came off the air intake, after the MAF sensor |
|
richard77 |
M59 Berlingo
|
9 |
1,474 |
15-06-2022, 09:57 AM |
| |
|
Thread: Big Loss of Power 2.0hdi
Post: RE: Big Loss of Power 2.0hdi
| So there is no Turbo Boost Pressure.
It drives very slowly, it did go to 4000rpm/50mph, in a very embarassing way |
|
richard77 |
M59 Berlingo
|
9 |
1,474 |
13-06-2022, 03:40 PM |
| |
|
Thread: Big Loss of Power 2.0hdi
Post: RE: Big Loss of Power 2.0hdi
| In neutral it revs very slowly up to 2/3000rpm, gets gradually quicker as revs rise to 4000+rpm
Im going to check turbo boost on Torque app |
|
richard77 |
M59 Berlingo
|
9 |
1,474 |
13-06-2022, 02:31 PM |
| |
|
Thread: Big Loss of Power 2.0hdi
Post: RE: Big Loss of Power 2.0hdi
| Its not in limp mode.
A hill it normally climbs in 5th at 50mph,Id have to use 4th or even 3rd.
Its like driving with the foot of God on the brakes |
|
richard77 |
M59 Berlingo
|
9 |
1,474 |
13-06-2022, 09:12 AM |
| |
|
Thread: Big Loss of Power 2.0hdi
Post: Big Loss of Power 2.0hdi
| Loss of power today meant it was too dangerous to drive so got relayed home.
It really became obvious when it wouldnt stay in 4th going uphill, and when it seemed like it was in 4th gear instead of 1s... |
|
richard77 |
M59 Berlingo
|
9 |
1,474 |
12-06-2022, 08:53 PM |
| |
|
Thread: Cambelt slipped? 2.0Hdi Or ECU?
Post: RE: Cambelt slipped? 2.0Hdi Or ECU?
| its "working".I put a couple of connectors on the bad wire
drove a few miles , no problem, in a safe place with a towcar behind me
Ive not been able to drive more than a mile without the fuse blowing ... |
|
richard77 |
M59 Berlingo
|
35 |
3,669 |
29-04-2022, 06:36 PM |
| |
|
Thread: Cambelt slipped? 2.0Hdi Or ECU?
Post: RE: Cambelt slipped? 2.0Hdi Or ECU?
| [attachment=7137]
The main wire harness from the ECU was rubbing against the battery holder
Would that cause intermittent fuse blowing whilst driving?
Hopefully I can tape these up |
|
richard77 |
M59 Berlingo
|
35 |
3,669 |
29-04-2022, 03:07 PM |
| |
|
Thread: Cambelt slipped? 2.0Hdi Or ECU?
Post: RE: Cambelt slipped? 2.0Hdi Or ECU?
| (24-04-2022, 05:06 PM)Zion Wrote: A good auto electrician would be able to trace the draw to a circuit and identify the faulty component.
You might never get to the bottom of this by yourself... |
|
richard77 |
M59 Berlingo
|
35 |
3,669 |
24-04-2022, 08:19 PM |
| |
|
Thread: Cambelt slipped? 2.0Hdi Or ECU?
Post: RE: Cambelt slipped? 2.0Hdi Or ECU?
| well i went for a spin, got a mile down the road before the fuse blew. another 2 fuses and i got home.
I had removed Fan Relay 1, and the MAF plug.
Also had tested all wire from fuse8 to the ECU and t... |
|
richard77 |
M59 Berlingo
|
35 |
3,669 |
24-04-2022, 02:16 PM |
| |
|
Thread: Cambelt slipped? 2.0Hdi Or ECU?
Post: RE: Cambelt slipped? 2.0Hdi Or ECU?
| It starts now, with the Air Flow Meter unplugged. With the AFM plugged in it blows the #8 ECU fuse.
I have these fault codes. Are they expected without the AFM?
P0102 Flowmeter signal : Measured flo... |
|
richard77 |
M59 Berlingo
|
35 |
3,669 |
23-04-2022, 01:30 PM |
| |
|
Thread: Cambelt slipped? 2.0Hdi Or ECU?
Post: RE: Cambelt slipped? 2.0Hdi Or ECU?
| Well I just went to go for a test drive, got about 5yards and it stopped.
This time unplugging EGR solenoid and airflowmeter didnt get it going again
Im running out of 20Amp fuses again |
|
richard77 |
M59 Berlingo
|
35 |
3,669 |
22-04-2022, 05:21 PM |
| |
|
Thread: Cambelt slipped? 2.0Hdi Or ECU?
Post: RE: Cambelt slipped? 2.0Hdi Or ECU?
| that was code P2143, not P1243, sorry
I blocked off the egr vacuum pipe at both ends, no fault codes coming up now |
|
richard77 |
M59 Berlingo
|
35 |
3,669 |
22-04-2022, 04:14 PM |
| |
|
Thread: Cambelt slipped? 2.0Hdi Or ECU?
Post: RE: Cambelt slipped? 2.0Hdi Or ECU?
| (22-04-2022, 12:26 PM)Zion Wrote: i wouldn't bother with the fan anyway.
Originally the EGR stood out, and that EGR flow code P0400 you have now, is because you started it with the MAF & E... |
|
richard77 |
M59 Berlingo
|
35 |
3,669 |
22-04-2022, 12:42 PM |
| |
|
Thread: Cambelt slipped? 2.0Hdi Or ECU?
Post: RE: Cambelt slipped? 2.0Hdi Or ECU?
| It works!
I disconnected the plug for the Airflowmeter and the EGR vacuum supply solenoid and it started up.
I reconnected the plugs and it still starts. I need a test drive yet.
Fault codes now are ... |
|
richard77 |
M59 Berlingo
|
35 |
3,669 |
22-04-2022, 12:01 PM |
