Search Results
Post Author Forum Replies Views Posted [asc]
    Thread: EGR issues.....
Post: RE: EGR issues.....

(13-09-2021, 01:50 PM)bradders79 Wrote:  Hi I am hoping for some advice or pointers. a month or two ago my 1.6 hdi started pulling up a EML and the code was P0402 EGR Excessive Flow Detected.  ...
saskak B9 Second Generation 4 659 16-09-2021, 07:43 PM
    Thread: Unsticking corroded bolts/nuts etc.
Post: RE: Unsticking corroded bolts/nuts etc.

Last time I did this, it took me 3 days to file through it. Too tight space and could not fit a hacksaw of any size. I had a file set and just filed through the bolt a mm by mm. Upon fitting a new one...
saskak M49 Berlingo 16 2,679 08-09-2021, 04:48 AM
    Thread: Unsticking corroded bolts/nuts etc.
Post: RE: Unsticking corroded bolts/nuts etc.

I use PB blaster, rather difficult to find but it has worked quite well for a few bolts/nuts. I'm not sure you will have much luck with any liquid for the exhaust clamps/bolts. Due to the extreme temp...
saskak M49 Berlingo 16 2,679 06-09-2021, 05:42 AM
    Thread: Oil filter up dated?
Post: RE: Oil filter up dated?

(31-08-2021, 04:59 PM)OMG Wrote:  Ok Thankyou. It is the HDI 2013. Seems the hole makes no difference . Wonder what it was there for originally? Maybe the new one is the right one and the used o...
saskak B9 Second Generation 5 656 31-08-2021, 07:46 PM
    Thread: Oil filter up dated?
Post: RE: Oil filter up dated?

(31-08-2021, 12:29 PM)OMG Wrote:  Have bought a new filter for van and its not the same as the one taken out.Have not had this vehicle long enough to know if this filter is ok. The omission of a...
saskak B9 Second Generation 5 656 31-08-2021, 02:31 PM
    Thread: Injector seal leaking
Post: RE: Injector seal leaking

(25-08-2021, 09:32 AM)BLINGO BOMBA Wrote:  First connector clicked straight in this morning! The other needed a fair bit of downward force via a hammer handle!  All good & no leaks. Ta again...
saskak M59 Berlingo 10 1,776 25-08-2021, 10:33 AM
    Thread: Injector seal leaking
Post: RE: Injector seal leaking

(24-08-2021, 08:52 PM)BLINGO BOMBA Wrote:  Ta for that, useful to know.  Unfortunately i need it for mot on Thursday, so wiill need to try brute force! Thanks again. Wiggle them in as much as th...
saskak M59 Berlingo 10 1,776 24-08-2021, 08:57 PM
    Thread: Injector seal leaking
Post: RE: Injector seal leaking

(24-08-2021, 07:24 PM)BLINGO BOMBA Wrote:  Finally tackled the injector seal, took ages to free the injector but got there eventually.  Problem now is im struggling to refit the leak off pipes a...
saskak M59 Berlingo 10 1,776 24-08-2021, 08:34 PM
    Thread: Injector leak off test (1.6HDi, M59, 92bhp)
Post: RE: Injector leak off test (1.6HDi, M59, 92bhp)

(24-08-2021, 08:01 PM)BLINGO BOMBA Wrote:  Hi Saskak, when you refitted the leakoff pipes it looked easy to click into place.  I removed 2 of my leakoff pipes but cant get them to click back in....
saskak Member Submitted Tutorials & How To's 8 2,666 24-08-2021, 08:30 PM
    Thread: injector coding
Post: RE: injector coding

(23-08-2021, 10:23 PM)gpowens1 Wrote:  had the we jar filled in 33 seconds Yeah, that's a bit too much, even with an injector cleaner that can be dissolved.
saskak B9 Second Generation 4 379 23-08-2021, 11:11 PM
    Thread: Rear wash wipe fail
Post: RE: Rear wash wipe fail

Thank you for the very good description and pictures. The cork at the end is priceless :-)
saskak M49 Berlingo 7 1,096 23-08-2021, 09:46 PM
    Thread: injector coding
Post: RE: injector coding

(23-08-2021, 06:59 PM)gpowens1 Wrote:  2009 1.6 hdi peugeot partner. leak of test has shown 1 injector letting through excessive diesel and 1 injector letting tbrough basically nothing so potent...
saskak B9 Second Generation 4 379 23-08-2021, 09:43 PM
    Thread: dash clocks
Post: RE: dash clocks

(23-08-2021, 04:01 PM)daz13 Wrote:  hi need help does anyone know if you can replace the instrument panel as JUST ! the clear bit is busted i have no idea how this happen it was like this when i...
saskak M59 Berlingo 3 695 23-08-2021, 04:28 PM
    Thread: Diesel Power Sport 4. Help required please.
Post: RE: Diesel Power Sport 4. Help required please.

(19-08-2021, 06:46 PM)Sierra Charlie Wrote:   (19-08-2021, 08:55 AM)saskak Wrote:   (18-08-2021, 07:09 PM)Sierra Charlie Wrote:  A neighbour of mine has given me some Diesel Power Spor...
saskak General Chat 6 648 19-08-2021, 07:34 PM
    Thread: Diesel Power Sport 4. Help required please.
Post: RE: Diesel Power Sport 4. Help required please.

(18-08-2021, 07:09 PM)Sierra Charlie Wrote:  A neighbour of mine has given me some Diesel Power Sport 4 ( Millers Oils ). It helped improve the running of his Talbort motorhome which he has sinc...
saskak General Chat 6 648 19-08-2021, 08:55 AM
    Thread: Limp Mode no error codes or warnings Please help.
Post: RE: Limp Mode no error codes or warnings Please he...

You can have multiple VMs within the virtual box. They can all be XP. One for the Volvo and another for the Diagbox, so there would not be clashes. You need some hard disk space of course, but because...
saskak B9 Second Generation 20 2,813 18-08-2021, 09:12 PM
    Thread: Limp Mode no error codes or warnings Please help.
Post: RE: Limp Mode no error codes or warnings Please he...

If I were you I would get a cheap diagbox interface from ebay. My quick search suggest that they can be had for ~£55. This is only an example https://www.ebay.co.uk/itm/402938556842, I have not really...
saskak B9 Second Generation 20 2,813 18-08-2021, 05:26 PM
    Thread: Cost of insurance
Post: RE: Cost of insurance

(17-08-2021, 09:12 PM)mangocrazy Wrote:  I've just received the renewal for my multi-vehicle insurance (the Bingo 2.0 HDi Desire plus my trusty old VW T4 Transporter) and it's come out at £535. ...
saskak M59 Berlingo 5 827 17-08-2021, 11:30 PM
    Thread: Limp Mode no error codes or warnings Please help.
Post: RE: Limp Mode no error codes or warnings Please he...

OK, so a VNT turbo, that is a bit different than the fixed one, a bit more complex. I am not really an expert on the VNT ones, but the vanes or the vanes' controller/sensor could be stuck/broken. Ther...
saskak B9 Second Generation 20 2,813 17-08-2021, 11:21 PM
    Thread: Engine oil and filter change on 57 plate 1.6hdi.
Post: RE: Engine oil and filter change on 57 plate 1.6hd...

(17-08-2021, 05:37 PM)Sierra Charlie Wrote:  Seems I may have "talked" this subject up........guess what arrived today......my logbook. Have taken a scan of the logbook, although I have left ou...
saskak General Chat 8 802 17-08-2021, 05:44 PM