Search Results
Post Author Forum Replies Views Posted [asc]
    Thread: Engine warning light
Post: RE: Engine warning light

I have used the car after the faults were cleared by my mechanic and it all seems ok to me power wise. I will do the search as you suggested just to read up on it. I had an OBD meter about 20 years ag...
hawkeyefxr B9 Second Generation 5 1,646 21-10-2021, 11:38 AM
    Thread: Engine warning light
Post: RE: Engine warning light

Thanks for the replies. There is 81K on the clock. Is there a way to check the sensor?
hawkeyefxr B9 Second Generation 5 1,646 20-10-2021, 06:15 PM
    Thread: Engine warning light
Post: Engine warning light

I have a 2013 multispace, while on a trip to Manchester the engine warning light came on. I found a local garage and he connected his machine and found it to be something to do with the turbo. He said...
hawkeyefxr B9 Second Generation 5 1,646 20-10-2021, 09:15 AM
    Thread: extending wires
Post: RE: extending wires

I can see the horn from the top and the wire to the horn is only about 6in long at most. II have not tried getting the wire off the horn as yet (watching MOTOGP qualifying) If i can get it off i want...
hawkeyefxr B9 Second Generation 4 1,812 05-06-2021, 10:46 AM
    Thread: extending wires
Post: RE: extending wires

Yea thats a bit like doing it with a blind fold on for me, a long long reach from the top and can't get to the lock, and from the bottom is awkward as well. I'm to old for scrambling around under car...
hawkeyefxr B9 Second Generation 4 1,812 04-06-2021, 05:56 PM
    Thread: extending wires
Post: extending wires

I will be changing the horn on my Berlingo but want to mount them higher up in the wing from the std current horn. I don't want to start scrabbling around cutting connector blocks off to extend the ho...
hawkeyefxr B9 Second Generation 4 1,812 04-06-2021, 08:46 AM
    Thread: Cigar sockets
Post: RE: Cigar sockets

Thanks for the replies, I may make up something to suit me that fits in the glove box bur still use std fittings.
hawkeyefxr B9 Second Generation 3 1,310 04-06-2021, 08:34 AM
    Thread: Cigar sockets
Post: Cigar sockets

Ok, i know they are generally thought of as cigar or cigarette lighters now. I have a dash cam and reversing camera both have these plugs, what would like to know is, is there anything better like a 1...
hawkeyefxr B9 Second Generation 3 1,310 03-06-2021, 10:23 AM
    Thread: 2013 Multispace
Post: RE: 2013 Multispace

I did see that youtube vid but it was pretty poor though i thought it was pretty poor. I does seem quite easy apart from the two plastic clips he twiddled in his fingers. He does not really explain w...
hawkeyefxr B9 Second Generation 2 1,435 14-04-2021, 02:41 PM
    Thread: 2013 Multispace
Post: 2013 Multispace

I want to remove the rear bumper on my Multispace, i have searched you youtube with no luck. I have looked here but the post i found had PNG files that did not load, tried downloading them and got a r...
hawkeyefxr B9 Second Generation 2 1,435 13-04-2021, 12:58 PM
    Thread: Fitting a revering camera
Post: RE: Fitting a revering camera

All in and working now. If anyone goes this route when you remove the big rubber bendy grommet at the top of the rear door, when you get the grommet out it leaves a white nylon behind. When you sta...
hawkeyefxr B9 Second Generation 6 2,752 07-04-2021, 03:29 PM
    Thread: Reversing Camera Feed
Post: RE: Reversing Camera Feed

It was the yellow cables with black lettering on my 2013 multispace.
hawkeyefxr M59 Berlingo 3 1,665 31-03-2021, 04:57 PM
    Thread: Running wires in the Tailgate
Post: RE: Running wires in the Tailgate

Thanks for the info, i have pulled the flange back and seen some white nylon. I though i would be using washing up liquid lol. .tb_button {padding:1px;cursor:pointer;border-right: 1px solid #8b8b8b;bo...
hawkeyefxr B9 Second Generation 2 953 23-03-2021, 07:01 PM
    Thread: Running wires in the Tailgate
Post: Running wires in the Tailgate

I will be running wires from the tailgate into the nearside of the car, camera wires and 12v supply. At the top of the tailgate is a flexi rubber tube that the rear run. I want to pull that rubber fle...
hawkeyefxr B9 Second Generation 2 953 23-03-2021, 06:01 PM
    Thread: Fitting a revering camera
Post: RE: Fitting a revering camera

(21-03-2021, 03:28 PM)Brixmis7 Wrote:   (21-03-2021, 02:54 PM)hawkeyefxr Wrote:  Mu camera is not that small but it will fit roughly where yours is. I have also decided to fit a 12LED that ...
hawkeyefxr B9 Second Generation 6 2,752 22-03-2021, 09:51 AM
    Thread: Fitting a revering camera
Post: RE: Fitting a revering camera

Mu camera is not that small but it will fit roughly where yours is. I have also decided to fit a 12LED that comes on when in reverse though that is not a big job.
hawkeyefxr B9 Second Generation 6 2,752 21-03-2021, 02:54 PM
    Thread: Fitting a revering camera
Post: Fitting a revering camera

2013 model I am in the process of fitting a reversing camera. I want to mount the camera under the black bar that goes across the rear door. Can this 'bar' (not sure of its real name) be removed. I ha...
hawkeyefxr B9 Second Generation 6 2,752 21-03-2021, 11:20 AM
    Thread: Dash Cam
Post: RE: Dash Cam

I have a Nextbase 522gw and i does what it'a supposed to do. By that i meant it works with no faffing about. Comes with a good setup kit, you can stick it to the screen or use the sucker. I chose to s...
hawkeyefxr General Chat 3 2,278 01-03-2021, 03:44 PM
    Thread: Setting clock
Post: RE: Setting clock

Thanks for that Argos69 (the mind boggles at that name lol) I have contacted Dynamics sounds on this to make sure i get the exact one i need.
hawkeyefxr B9 Second Generation 4 2,191 19-02-2021, 04:23 PM
    Thread: Setting clock
Post: Setting clock

I think i know the answer to my question but here goes. I had a new battery fitted over the new year and that reset the clock. I have a Kenwood radio fitted so setting the clock up is impossible unle...
hawkeyefxr B9 Second Generation 4 2,191 19-02-2021, 02:34 PM