|
Search Results
|
| Post |
Author |
Forum |
Replies |
Views |
Posted
[asc]
|
| |
|
Thread: Berlingo 07 won't engage 2nd gear
Post: RE: Berlingo 07 won't engage 2nd gear
| There's quite a few components to the gear selector linkage all with wearable/consumable parts. Generally what has the gear lever been like? Is it as vague as stirring custard in a bucket - has it alw... |
|
Kyleonsite |
M59 Berlingo
|
2 |
148 |
14-01-2025, 08:28 PM |
| |
|
Thread: knocking from rear
Post: RE: knocking from rear
| Park it in gear on flat level ground with the handbrake off, open the tailgate and stand in the boot dangling to the side of the tailgate. Bounce the rear end up and an down as much as you can. Any cl... |
|
Kyleonsite |
M59 Berlingo
|
5 |
157 |
14-01-2025, 08:23 PM |
| |
|
Thread: Engine will not start
Post: RE: Engine will not start
| Regardless of the key battery being dead (or not) the key should still mechanically work in the door lock and start the car.
Regarding the starter - can you hear the solenoid 'clunking' with the igni... |
|
Kyleonsite |
M59 Berlingo
|
5 |
426 |
02-12-2024, 08:30 AM |
| |
|
Thread: Battery protection from icy conditions.
Post: RE: Battery protection from icy conditions.
| I doubt it's the temperature of the battery per se but more the added load having to turn over an engine with thicker oil along with probably the heater fan/headlights/heated screen all being used due... |
|
Kyleonsite |
General Chat
|
12 |
679 |
06-10-2024, 06:41 AM |
| |
|
Thread: Longevity of vehicle.
Post: RE: Longevity of vehicle.
| Thanks!
All my cars are like new underneath, similar routine, remove as much rust as possible (3M strip-it discs or sandblasting), Fertan any pitted rust that's left, Jotun 87W epoxy mastic on non sa... |
|
Kyleonsite |
General Chat
|
12 |
1,076 |
02-10-2024, 10:44 PM |
| |
|
Thread: Longevity of vehicle.
Post: RE: Longevity of vehicle.
| I have a 2004 Peugeot Partner Escapade, bought with 83k miles now on 115k.
I keep cars as long as possible - the only reason I'd sell is if it no longer serves its original purpose.
Mine is pumped f... |
|
Kyleonsite |
General Chat
|
12 |
1,076 |
01-10-2024, 07:25 PM |
| |
|
Thread: Berlingo desire 2.0 Hdi top end'ish type rattle
Post: RE: Berlingo desire 2.0 Hdi top end'ish type rattl...
| One thing I've found with mine is that if I just pottle about locally for a few weeks then it 'cokes' up a bit on one of the injector's. It then idles a bit roughly - watching the aux belt you can see... |
|
Kyleonsite |
M59 Berlingo
|
4 |
480 |
20-09-2024, 07:08 PM |
| |
|
Thread: M59 Horn woes and airbag removal
Post: RE: M59 Horn woes and airbag removal
| You don't need to remove the steering wheel. I loosely wrapped some bare wire round the steering shaft lower down towards the foot pedals and then loosened a screw/nut in the area to fasten the wire t... |
|
Kyleonsite |
M59 Berlingo
|
6 |
544 |
20-09-2024, 09:24 AM |
| |
|
Thread: Berlingo desire 2.0 Hdi top end'ish type rattle
Post: RE: Berlingo desire 2.0 Hdi top end'ish type rattl...
| I've had a 2.0hdi for a few years and done a lot of tinkering with it.
It sounds like something is seriously amiss if you are shredding belts?
I changed the crank pulley early on in my ownership to ... |
|
Kyleonsite |
M59 Berlingo
|
4 |
480 |
20-09-2024, 09:16 AM |
| |
|
Thread: Door mirrors
Post: RE: Door mirrors
| Is it a left hand drive mirror? Only the passenger mirror is motorized so a LHD mirror would have unusable cables if you tried fitting it to a RHD car. |
|
Kyleonsite |
M59 Berlingo
|
7 |
596 |
07-09-2024, 06:27 AM |
| |
|
Thread: Suspension arms
Post: RE: Suspension arms
| There are two types of control arm - a pressed steel version with a removable lower ball joint or the cast iron version with integral non removable ball joint (like fitted to mine).
Quality OEM bran... |
|
Kyleonsite |
M59 Berlingo
|
3 |
417 |
12-08-2024, 04:38 PM |
| |
|
Thread: Is it the end for my engine...?
Post: RE: Is it the end for my engine...?
| Compression test the engine to discount rings but unfortunately there isn't much more that could pressurise the crankcase to that extent. Is it down on power/lumpy idle? |
|
Kyleonsite |
M59 Berlingo
|
5 |
450 |
31-07-2024, 02:33 PM |
| |
|
Thread: N/S drive shaft wont go into the gearbox! Please help!
Post: RE: N/S drive shaft wont go into the gearbox! Plea...
| In a similar vein - I have a dead nearside/left outer CV joint so bought a complete GKN Lobro shaft from Autodoc. It should be correct as it's for a non ABS car (which mine is), all other details were... |
|
Kyleonsite |
M59 Berlingo
|
4 |
2,032 |
25-06-2024, 07:17 PM |
| |
|
Thread: M59 Lift Kit
Post: RE: M59 Lift Kit
| You can fit Peugeot Escapade (also called a Peugeot Ranch in Europe) shocks and springs, these give +30mm increase in travel over a standard Berlingo setup.
The lift kits you mentioned sit on top of... |
|
Kyleonsite |
M59 Berlingo
|
6 |
665 |
30-05-2024, 08:55 AM |
| |
|
Thread: Speedometer stopping Nightrider turbo boost
Post: RE: Speedometer stopping Nightrider turbo boost
| Update and fix!!!!
This issue had continued and if anything had started to occur more frequently. This increase coincided with the water pump bearings becoming worn and started to loose a little cool... |
|
Kyleonsite |
M59 Berlingo
|
28 |
2,984 |
30-05-2024, 08:42 AM |
| |
|
Thread: Manual clutch cable
Post: RE: Manual clutch cable
| Sorry! Should have updated sooner.
On further inspection it appears the cable is actually okay, it's the clutch itself/release bearing or the fork has failed. Will disassemble when I get minute. |
|
Kyleonsite |
M59 Berlingo
|
8 |
1,149 |
08-04-2024, 12:13 AM |
| |
|
Thread: Manual clutch cable
Post: RE: Manual clutch cable
| Manual clutch cable update.........snapped tonight! (thankfully just outside the house) |
|
Kyleonsite |
M59 Berlingo
|
8 |
1,149 |
31-03-2024, 09:13 PM |
| |
|
Thread: 1.7kw starter
Post: 1.7kw starter
| Admittedly I'm a bit late to the party with this but I'll just say that if anyone has a 2.0HDI make sure you fit a 1.7kw starter motor rather than the asthmatic standard 1.4kw
Rather than churning aw... |
|
Kyleonsite |
M59 Berlingo
|
0 |
345 |
13-02-2024, 03:22 PM |
| |
|
Thread: White smoke on morning start-up
Post: RE: White smoke on morning start-up
| Knocking and smoke is incomplete combustion on a cylinder. Either because from low compression on a cylinder or a tired/faulty injector.
Does it drive under load okay or is it smoking/lumpy only when ... |
|
Kyleonsite |
M59 Berlingo
|
3 |
635 |
20-01-2024, 10:57 PM |
| |
|
Thread: 2.0 HDI EML [P0227] on cold mornings
Post: RE: 2.0 HDI EML [P0227] on cold mornings
| How quickly does it fire up when cranking? Only asking as IIRC the ECU has to see 300rpm cranking speed before firing the injectors / starting the engine. The standard 2.0hdi starter is 1.4kw and stru... |
|
Kyleonsite |
M59 Berlingo
|
3 |
750 |
18-01-2024, 02:02 PM |
