Torque Setting

[Green Monster]

Hi All,

I have fitted a new front coil spring but my manual has not arrived yet. Can anyone supply the torque settings for:

Drive shaft nut
Steering ball joint
Anti roll bar joint
Brake caliper bolts

Many thanks

[Landmark]

Hi Green Monster
1. 320nm
2. 35nm
3. 40nm
4.27 nm
Regards,
Griff

[lorraine]

320nm?

[Green Monster]

Many thanks. 320Nm seems high, this explains why I needed to use a long extension on my socket set to undo it. Should have the MOT passed tomorrow.

[Landmark]

Hi GM,
Re drive shaft nut. I assume you mean the large nut under the lockingcap secured with "R" clip. If so that's the correct setting according to the Haynes manual.
Griff

[800HDI]

Good luck getting it to 320nm