[Filters & Oil] bleeding fuel

[keith roberts]

hi there,i,m new to this forum,and I,v just bought a 1.6 hdi vtr 2011 plate,,i have a couple of queries which I hope someone could help me with,1,is there a manual,for this model ,as I,v tried Haynes,and they don't do one after the 60 plate,2,when you change the fuel filter,does it self bleed as there doesent seem to be a bleed bulb,and 3,where is the oil filter,
would appreciate any help,thank you

[ntm1275]

1. There isn't a Haynes manual for the current B9 model from 2008 onwards

2. There is a bleed bulb, it on top of the engine just in front of the air filter (you may have to take off the top engine cover if you have one
[Image: P1080215x.JPG]

3. If you look at the turbo on the front of the engine and cast your eyes just to the right and down, you will see a round bowl like fitting coming out at about a 45 degree angle
[Image: watermarked_OF_-__077.jpg]

It takes one of these
[Image: Image.aspx?ID=1357145]

[Jed Clampit]

Hello Keith welcome to the forum good to have you with us as ntm wrote and pics look through the threads on here about servicing 1.6 hdi and make sure you follow it it will stop you running in to problem 

[keith roberts]

1. There isn't a Haynes manual for the current B9 model from 2008 onwards

2. There is a bleed bulb, it on top of the engine just in front of the air filter (you may have to take off the top engine cover if you have one
[Image: P1080215x.JPG]

3. If you look at the turbo on the front of the engine and cast your eyes just to the right and down, you will see a round bowl like fitting coming out at about a 45 degree angle
[Image: watermarked_OF_-__077.jpg]

It takes one of these
[Image: Image.aspx?ID=1357145]