Lexia PP2000 Help!!

[306carter]

Afternoon all

I am have trouble with Diabox/Lexia/PP2000. I want to activate cruise control on my Berlingo.

Here is the story thus far.

I have a Windows 7 Pro Laptop with Virtual XP running I have installed the software but my laptop wont't see the interface (in XP mode or in normal mode) I'm thinking there is a problem with the driver for the device? The green light comes on but and my laptop says its searching for the driver but thats as far as i get. When i open Diagbox it says please connect a VCI.

Below is what i purchased from ebay... Is this everthing i need?

http://www.ebay.co.uk/itm/181680156638?_...EBIDX%3AIT
http://www.ebay.co.uk/itm/221687777717?_...EBIDX%3AIT

At a loose end with it now, so any help/advice would be greatly appreciated.

[gazahull]

hi.        i can't get my diagbox working after v7.61........getting errors after this update. if any members knows a fix please let us know.    never had problem with updates, until after v7.61                                  cheers

[306carter]

Just a quick update. My laptop has USB 3 ports, i disabled this feautre in the BIOS and its working now!

[polar]

If you got it working you may not need to do the dreaded format and re-loading of windows. This is what need to be done sometimes to get some of this diag software working!

[306carter]

It seems to be up and working now. Just a problem with identifying my ECU. I was running v7.02 but I've since upgraded to v7.60 so hopefully it will see my ECU.

[brajomobil]

It seems to be up and working now. Just a problem with identifying my ECU. I was running v7.02 but I've since upgraded to v7.60 so hopefully it will see my ECU.

What is your engine ? And what is firmware version of Lexia chip, revision "C" or "B" ?