Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Limiter fitted
#1
Hi all Iv a 2010 berlingo with a speed limiter fitted Iv had it into citreon and they pluged there machine into my ecu to remove it but there is nothing there There defernatly is one fitted somewhere but they have no idea at citreon any help please 65 mph is too slow
Reply
#2
It's the hdi 1.6 90 hp model
Reply
#3
Do you know who owned the van before it sounds like an aftermarket fit, I would give the previous owner a ring for any info they may have. They usually hide little black boxes and alarm modules up under the dash/ behind glove box or behind the speedo binnacle.
Are we there yet????? Huh
Ex 1.6hdi van now 3 seater 1.4 multispace
[-] The following 1 user says Thank You to Tomcat3 for this post:
  • Robert Newton
Reply
#4
Hi it was from lex auto lease I rang them they said it was a factory fit one that's why I took it to citreon to remove but no joy and they had no idea either
Reply
#5
Hi they usually fit them behind passenger glove box , all u do is snip off the wires and it won't control the speed of van or u can also get phone number off unit and they can reprogrammed to higher or lower speeds , I've removed some from blue gas vans we purchased in bca auctions
(21-04-2015, 05:14 AM)Robert Newton Wrote:  Hi it was from lex auto lease  I rang them they said it was a factory fit one that's why I took it to citreon to remove  but no joy  and they had no idea either
[-] The following 1 user says Thank You to denisg1973 for this post:
  • Robert Newton
Reply
#6
Hi thankyou I'll take a look behind there what does it look like
Reply
#7
(23-04-2015, 04:22 AM)Robert Newton Wrote:  Usually black be tape on wires they joined in to once removed it be full speed again I have some in garage I'll take pics and put on post for u if u can't find it Hi thankyou I'll take a look behind there  what does it look like
[-] The following 1 user says Thank You to denisg1973 for this post:
  • Robert Newton
Reply
#8
Thanks I'll see if I can find it
Reply
#9
Hi Iv found a black box with ramatic dbw system on it Iv opened the box wasn't sure what to cut so Iv pulled the fuse out the van seams to still work just needs testing fingers crossed
Reply
#10
(25-04-2015, 01:43 PM)Robert Newton Wrote:  Hi Iv found a black box with ramatic dbw system on it Iv opened the box wasn't sure what to cut so Iv pulled the fuse out the van seams to still work just needs testing fingers crossed

It's a Romatic system on google. If it's the Romatic 80 and you try to tamper with it it reduces the speed to 80% limp mode.
So where does this bit go then ?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Strut Top Mounts
Last Post: shtu
Today 07:58 PM
» Replies: 3
» Views: 1044
Rear Suspension Rebuilders?
Last Post: smutts
Yesterday 09:30 PM
» Replies: 13
» Views: 3130
Wishbones, good makes?
Last Post: smutts
Yesterday 09:27 PM
» Replies: 13
» Views: 1774
Rear seat belt breakage
Last Post: evdama
Yesterday 04:13 PM
» Replies: 3
» Views: 622
removing front strut
Last Post: smutts
13-09-2026 06:10 PM
» Replies: 5
» Views: 7162
22reg diesel recall
Last Post: DavidM
12-09-2026 05:49 AM
» Replies: 12
» Views: 1523
Against my better judgement...
Last Post: evdama
07-09-2026 09:06 AM
» Replies: 12
» Views: 720
speedo/ milomoeter erratic failure berlingo 1.6H...
Last Post: BDRichardson
06-09-2026 04:07 PM
» Replies: 4
» Views: 602
1.5 Blue HDi info: oil and chain
Last Post: kulat
03-09-2026 09:59 PM
» Replies: 43
» Views: 102471
How to fit grease nipple on rear axle berlingo
Last Post: smutts
29-08-2026 08:39 PM
» Replies: 44
» Views: 41821

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK