[Engine] Converting to 1.9dt

[Karl1989]

Hib guys picking up a 1.9dt engine for my flat diesel Berlingo. I've heard lots of rumours of having to splice looms ect and thought i would make sure 100%. The van is a 03 plate 1.9d and putting in the 1.9dt. All I can think is there basically the same so plug and play and the down pipe will need changing. Anyone shed some light on if this is just a basic straight swap

[Tomcat3]

Hi Karl I suggest you have a look at this thread and perhaps get in touch with Eddy http://www.berlingoforum.co.uk/thread-12741.html
He knocked it up over Christmas and did a cracking job.

[Jed Clampit]

Hi Karl worth a read he done a cracking job in a very short time he used the loom from the car that the engine come from if you PM him nice chap i'm sure he will help you out . 

[Karl1989]

Cheers guys spoke on the fone I'm prepared slightly