23-05-2016, 09:01 AM (This post was last modified: 23-05-2016, 09:46 AM by 48pop.)
Did the full strip out this weekend, Lots of plastic....Decided to lift the rear carpet as well. its up to 30mm thick in places. I had to nip down to the shops..What a noise ! Could even hear the fuel sloshing around in the tank !
I thought about lining with flashband with some insulation, then had another thought, why not just leave in the factory fitted carpet/insulation.... So thats what I'll do, I'll be overlaying a 12mm plywood board over the top. I'll strip the insulation in a couple of places and lay in some battens to take out any bounce.
Floor down, bed frame made, mockup in ply and framing of hanging space, sink, cooker unit. This will used as my template, unit remade in 15mm furniture board, electric (12 and 240v will be ordered today.....)
Some minor progress to report. I now have most everything I need to complete, picked up furniture board and trim from Magnum Motorhomes.
Stripped out my mockup, (I think its all going to fit....), and laid in the wiring. going to be provision for 12v and 240v.
All wiring is in trunking and was a pain to route ! I labeled everything (for me and any future owner), Also cut the hole in the floor for the gas dropout, 907 Camping Gaz bottle. Onwards and upwards