Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Garret Turbo Fitting Guide - Video
#1
Spotted this on the web, it is a video guide produced by Garret ... it may have been posted before but worth doing again I think.


   Garrett by Honeywell Turbo Replacement on DV6TED4 Engine

 
       Hopefully nobody will ever need to use it  Angel
Reply
#2
Okay but the oil filter should be removed before the oil is drained and sump removed, they have just drained the dirty oil out of the filter into the sump!

The oil pump only needs replacing if the engine is big time carboned up due to leaking injectors.

The vacuum pump has a filter in it that needs cleaning out.

The turbo feed pipe does not need replacing you can clean and modify it. you can also modify the oil strainer.
Reply
#3
Good point polar filter off first then drain the sump then sump off then  take the oil feed pipe off take a good look at the strainer to see if it's clean if it is take the strainer off and us the pipe with out it you can buy a new one from Citroen with out the strainer around £15 if there's a lot of sludge in the sump it will need a good clean the oil pick up pipe with strainer in the sump will need replacing if it's all clean then there's no need to replace it . Smile
                                     Smile  It's too orangey for crow's It's just for me and my dog  Smile

                                                        Heart Heart Love a lot trust a few  Dodgy
 
                                                        

                                        
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
New engine old pump
Last Post: Zweli
Yesterday 06:53 PM
» Replies: 4
» Views: 407
2012 multispace tow bar wiring
Last Post: evdama
Yesterday 04:57 PM
» Replies: 4
» Views: 925
Recommend Socket Set
Last Post: evdama
Yesterday 04:20 PM
» Replies: 3
» Views: 371
Not a Berlingo but its the same Chassis....
Last Post: Tree
Yesterday 12:42 PM
» Replies: 0
» Views: 198
2008 1.6hdi - Anti Pollution Fault won't rev abo...
Last Post: Tree
Yesterday 12:28 PM
» Replies: 5
» Views: 417
1.6hdi dpf regen limit?
Last Post: Luis Rosa
Yesterday 11:09 AM
» Replies: 3
» Views: 388
all warning lights and won't start
Last Post: ian3j
Yesterday 09:12 AM
» Replies: 9
» Views: 784
Dip beam level adjustment motor
Last Post: ffrenchie
Yesterday 07:12 AM
» Replies: 1
» Views: 331
steel wheels
Last Post: dabber5411
13-08-2018 07:30 PM
» Replies: 0
» Views: 313
What model do I have?
Last Post: Zweli
13-08-2018 06:53 PM
» Replies: 2
» Views: 303

[-]
Recent Visitors
Locations of visitors to this page