Posts: 4
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 0
Joined: Dec 2010
Location:
Reputation:
0
hello,
this is my first experience of forum use, so bear with me. I need to tap your brain power on the subject of retro fitting cruise control to an 07 Berlingo. Ihave been told its as simple as fitting the control stalk, modifying the ecu and bsi settingsand that's it basically. Can anyone enlighten me? Many thanks.
•
Posts: 1,709
Threads: 52
Thanks Received: 316 in 279 posts
Thanks Given: 87
Joined: Oct 2010
Location: Switzerland
Reputation:
5
Had a look over on the German forum (
http://www.berlingo.org) and people report that some dealers won't do it and a number of folks had the cruise control installed by their dealer for around €130. No reports of a DIY job though.
2010 Berlingo Multispace HDi 110 with FAP. Persamos green.
•
Posts: 697
Threads: 25
Thanks Received: 231 in 131 posts
Thanks Given: 44
Joined: Sep 2010
Location: Moscow
Reputation:
12
dgc.
At M59 Berlingo it's possible to install cruise control, but car must be equipped with:
1. ABS(for diesel engines)
2. Clutch sensor.
3. Cruise control arm (sparepart 6242 Z8 or 6242 Z9).
4. BSI of 2nd or 3rd type and of course compatible BSM.
•
Posts: 4
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 0
Joined: Dec 2010
Location:
Reputation:
0
Thanks 3renho and pk7478. I will check German forum. I have control stalk (£47) fitted and sons diagnostic software sees it but cc still not working. The problem may be a lack of clutch switch as the diagnostic software says 'clutch pressed' no matter what state clutch pedal. pk7478 what does M59 berlingo refer to?
Thanks
•
Posts: 1,884
Threads: 147
Thanks Received: 388 in 254 posts
Thanks Given: 263
Joined: Sep 2010
Location: London
Reputation:
11
29-12-2010, 11:24 AM
(This post was last modified: 29-12-2010, 11:24 AM by Andre.)
Hi dgc, from an earlier post on the forum, the M59 refers to the MK2 model of your Berlingo. (Berlingos from 02-08) The new Berl is B9, and the first is M49.
The following 1 user says Thank You to Andre for this post:1 user says Thank You to Andre for this post
• j90xxx
Posts: 1,709
Threads: 52
Thanks Received: 316 in 279 posts
Thanks Given: 87
Joined: Oct 2010
Location: Switzerland
Reputation:
5
Wow pk7478 you da man. You've got some great info.
2010 Berlingo Multispace HDi 110 with FAP. Persamos green.
•
Posts: 4
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 0
Joined: Dec 2010
Location:
Reputation:
0
pk7478
Thanks for the information.The number you require VF7 GB9HXC 94309993. Software is Lexia 3 and adaptor is PSA XS Evolution AC965250.
•
Posts: 697
Threads: 25
Thanks Received: 231 in 131 posts
Thanks Given: 44
Joined: Sep 2010
Location: Moscow
Reputation:
12
29-12-2010, 08:56 PM
(This post was last modified: 29-12-2010, 09:01 PM by pk7478.)
VIN is incorrect
Upper mentioned diagram may be not correct because you have B9. Those diagrams is for M59.
Clutch sensor you can test via Lexia, somewhere in ECU diagnostics (don't remember where exactly).
•
Posts: 4
Threads: 1
Thanks Received: 0 in 0 posts
Thanks Given: 0
Joined: Dec 2010
Location:
Reputation:
0
pk7478,
Thanks for your effort and all the information. The vin I got from documents yesterday i checked with the plate on the van today and they match. Its a Mk2 first reg. Feb 07 can't explain numbers.
•