Poor cold startup 1.9

[Top drive]

Nice work.

It'll run nicer too . No double detonating. Mines revs so much freer ....It's not any faster but it seems to pick up better from a standing start. Less revs needed to get it moving.

[dumdum]

I just wet and dried mine after working out what sizes I had that I could use ie i measured all the shins and used some in other locations that they were correct for, then used the remainders with wet and dry and removed excessive material until they were correct

You really could do with the thinnest shim that they do so you can then measure the gap and work out what size you actually need, it took about 4hrs all told and I did the cambelt in the process, it worked a treat though and fired up perfect every time after that ?