Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2000 berlingo multispace
#1
As a newbie can anybody help
I have recently been given my berlingo but it seems to be have cold starting problems after having the timing belt and glow plugs replaced
It seems to run rough, misfire at tickover and sends out plumes of pale blue smoke under acceleration car runs fantastic once warmed up, a friend suggested that it could be the EGR valve sticking so had this cleaned still got the same problems so hoping some kind person on the forum has had previous experience of this problem and can tell me how to fix it.
Reply
#2
Welcome to the forum ,
There are different diesel engines fitted , a 2.0 or 1.9. , which do you have.?

The early engines had different ways of getting the engine to run sweet when starting from cold.

Did it run well before the belt was changed and did you think the glow plugs needed replaced ?
Reply
#3
Check the timing again and remove glow plugs and test.

where did you get the glow plugs from?

Who changed the cam belt?

As brodfather11 says ^^ what engine + mileage
Reply
#4
Hi
The engine is the 1.9 had the glow plugs replaced after the belt was done thinking one of the plugs could have burnt out causing the problem but the colder it is getting the worse the problem seems to be getting
Reply
#5
The belt and plugs where replace at my local citroen dealers they are adamant the timing is correct
Reply
#6
Before the belt was changed the engine ran perfectly the car has done 84 thousand
Reply
#7
Does it start easily and run rough or hard to start and run rough?

There are cold start devices on them , which if not working properly (or not reconnected ) will let it start but not run smoothly until warm .

Its strange that its only since its had a new belt etc that the problems started . I would ask them to recheck the timing
Reply
#8
Would anybody know where the cold start device is located
Reply
#9
Take it back to the dealer - it ran right before so ask to speak to the service manager.

It wont be the cold start.
Reply
#10
Cannot take back to the dealer as it was my uncle that had the work done before he went back to Australia earlier in the year I have all the receipts but I don't think the dealer would entertain doing the work.
Brodfather11the car stars easily and runs rough
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Phone call in progress
Last Post: Leonberger
Today 07:11 AM
» Replies: 4
» Views: 53
HDI injectors failing
Last Post: drc
Today 06:12 AM
» Replies: 0
» Views: 11
Airbag light won't go out
Last Post: Multispacer
Today 12:00 AM
» Replies: 1
» Views: 34
Berlingo multispace Clockspring issue
Last Post: Multispacer
Yesterday 11:39 PM
» Replies: 1
» Views: 41
M49 wiper blades
Last Post: geoff
Yesterday 07:48 PM
» Replies: 4
» Views: 49
DV6C 9HL injector options
Last Post: KD305
Yesterday 06:25 PM
» Replies: 4
» Views: 163
brake master cylinder
Last Post: BigVtwin996
Yesterday 03:28 PM
» Replies: 2
» Views: 30
Hello
Last Post: OMG
Yesterday 01:11 PM
» Replies: 1
» Views: 60
Passenger seat warning light by pass
Last Post: Bluebottle
Yesterday 11:37 AM
» Replies: 0
» Views: 30
How to identify knocking injector
Last Post: brodfather11
Yesterday 10:35 AM
» Replies: 1
» Views: 41

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK