Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Aux line and activating this option
#11
Activated the auxiliary port in my Peugeot 407 using Diagbox.
Easy enough done.
Malcolm.
2001 1.9D Multispace.
Diagbox diagnostics in Northumberland.
Reply
#12
MPPS is for changing software in the engine ecu, and also as said, probably not ok for the 1600 hdi. You certainly should mess with this unless you know exactly what you are doing.
The car has several ecu's and enabling the aux to work is not done by messing with the engine ecu.
You will need diagbox which can communicate with every part of the car & every ecu.
Once you have got this operating correctly & you know where to make alterations, it is quite simple to turn on the aux capability.
[-] The following 1 user says Thank You to Lighty for this post:
  • ron
Reply
#13
hi everyone, I have bought from ebay an aux adapter for the RD4 Radio on my berlingo, connected that but not getting anything when pressing on source selector, if that needs activating how can I find someone with the software to enable it.

Thanks
Reply
#14
Post what area you are in and see if anyone has the software and interface or knows some who does.

Mark

Sent from my Vodafone Smart ultra 6 using Tapatalk
Reply
#15
Hi all,

I've now enabled the aux input on my rd4, this is the guide I used.

From main menu after hooking up to the Van:-

1. click repair - it then does a global test
2. highlight the radio bar in the test results, click green tick.
3. click configuration - it then tells you to start the engine, click green tick
4. click configuration again
5. click manual configuration
6. click radio configuration - it then does a test on the radio
7. highlight aux 1, click green tick it
8. select conventional setting
9. click settings button, it then should tell you it was successful, click green tick

You should then be able to access input 1 via the source button on the radio.

I can't take credit for the guide as forum member Peter Palmer provided it.

Mark

Sent from my VFD 710 using Tapatalk
Reply
#16
Did the OP get this issue resolved?

If not, then I'd recommend Bute Service Centre in Ardrossan. They have the equipment to read / programme the ECU without the risk that accompanies an aftermarket alternative.
Any time I've needed their expertise, I've felt it worth the few pounds that they charge (and the short journey).

Ardrossan may not be close enough to make it worthwhile though. Undecided
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
Which MK is my 2018 Berlingo?
Last Post: ParkinRJ
Today 07:42 PM
» Replies: 0
» Views: 13
Berlingo multispace clocksping nightmare!
Last Post: dvee50
Today 07:34 PM
» Replies: 0
» Views: 11
Phone call in progress
Last Post: Leonberger
Today 03:56 PM
» Replies: 5
» Views: 76
HDI injectors failing
Last Post: drc
Today 06:12 AM
» Replies: 0
» Views: 38
Airbag light won't go out
Last Post: Multispacer
Today 12:00 AM
» Replies: 1
» Views: 39
Berlingo multispace Clockspring issue
Last Post: Multispacer
Yesterday 11:39 PM
» Replies: 1
» Views: 50
M49 wiper blades
Last Post: geoff
Yesterday 07:48 PM
» Replies: 4
» Views: 49
DV6C 9HL injector options
Last Post: KD305
Yesterday 06:25 PM
» Replies: 4
» Views: 173
brake master cylinder
Last Post: BigVtwin996
Yesterday 03:28 PM
» Replies: 2
» Views: 39
Hello
Last Post: OMG
Yesterday 01:11 PM
» Replies: 1
» Views: 60

[-]
Recent Visitors
Locations of visitors to this page

[-]
Hosting by

QuickHostUK