Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Aux line and activating this option
#1
Hi,

I have a basic Smile Smile Smile model Berlingo with no Aux lead or CD multi changer.  I have added a lead to the back of the head unit but need to activate the Aux mode in the cars ECU.

I have read on another forum about how to do this and although a bit fiddlely didn't seem too bad.  In a bout of over exuberance I got the MPPS ECU flasher form Ebay and started looking into plugging it in.  The software that came with the dongle had ECU data for a 2.0 HDI Bosch EDC15C2 K-line, I'm not sure that's what I have in my 1.6 HDI.

A little more research then noted that I could seriously damage my ECU by using MPPS flashers!!!!

I'm thinking more that I should just be settled with listening to radio and CD

Has anyone done this activation themselves?  I bought an ebay item that came with AMT-Cartech software v 12.0.0.6

I have a friend who used this on his BMW with no issues, although his ECU showed correctly and he hadn't read of ECU destroying MPPS's

Any help would be appreciated

Thanks

Chris
Reply
#2
Personally I would leave the ECU alone, I am not adventurous enough to try anything like that. Fry the ECU and it’s a LOT of money to replace it.
--------------------------------------------------------------

2012 Iron Grey XTR 110 with lots of bits and bobs.
Reply
#3
Hi Bigblues,

I believe activating aux can only be done with the genuine / copy lexia adapter and software, I have this equipment and want to activate aux so I can use a connects2 Bluetooth box but I haven't bought the connects2 unit yet or been brave enough to do it yet.
If / when I do get to it I will post my experiences.

Mark
[-] The following 1 user says Thank You to Satellitemark for this post:
  • Bigblues
Reply
#4
Peter offered me advice on this subject in another thread here,

http://www.berlingoforum.com/showthread....7#pid87907

Mark
[-] The following 1 user says Thank You to Satellitemark for this post:
  • Bigblues
Reply
#5
(26-01-2017, 02:30 PM)Satellitemark Wrote:  Hi Bigblues,

I believe activating aux can only be done with the genuine / copy lexia adapter and software, I have this equipment and want to activate aux so I can use a connects2 Bluetooth box but I haven't bought the connects2 unit yet or been brave enough to do it yet.
If / when I do get to it I will post my experiences.

Mark

It's the bravery part that gets me, like the chap above said, get it wrong and it's £££££
Reply
#6
(26-01-2017, 02:38 PM)Satellitemark Wrote:  Peter  offered me advice on this subject in another thread here,

http://www.berlingoforum.com/showthread....7#pid87907

Mark

Thanks again, this is the post that inspired me initially.....

It's the Lexia business that still confounds me
Reply
#7
I think with the unit you have allows you to upload your car's ECU map and then you can send it off to a firm that will modify it then return the modified map for you to upload to your ecu, they say they can modify for economy or power output and or removal of dpf and other emmisions kit.
I don't know how well any of these functions work or if it is able to do anything else .

Mark

Sent from my Vodafone Smart ultra 6 using Tapatalk
Reply
#8
For edc16 , your car, MPPS is not good !

For edc16 the best is Galleto v54 and not over OBD. Better go BDM flash.

Best regards,
brajomobil
Reply
#9
It was certainly mean of Citroen to provide the ability to connect AUX then charge a fortune for the software change (and leads, although these can be bought cheaply elsewhere).

I would have liked to connect my mp3 player on the Berlingo but in the end just kept a few CDs handy instead.

My Picasso has Apple Carplay which is a world apart in terms of ease of use and integration, I would hope that the replacement Berlingo has it.
Reply
#10
My radio plays mp3 music burned in CDs. it is not the aux line, but it is not as bad as only playing audio cds...

activations of aux inlets can only be achieved using lexia software and interface...
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)
[-]
Welcome
You have to register before you can post on our site.

Username:
  

Password:
  




[-]
Search
(Advanced Search)

[-]
Latest Threads
That question again
Last Post: tommylurvebus
Today 08:12 AM
» Replies: 0
» Views: 18
Clutch cable mounting plate?
Last Post: cancunia
Today 07:31 AM
» Replies: 6
» Views: 518
Missing posts
Last Post: brodfather11
Today 06:05 AM
» Replies: 1
» Views: 212
Radio wiring.
Last Post: brodfather11
Today 06:01 AM
» Replies: 12
» Views: 1683
Dingo - 05 - 2.0 HDI
Last Post: Hardnut
Today 03:49 AM
» Replies: 81
» Views: 17080
Grizz' Prozac for the Soul - Berlingo Multispace
Last Post: Grizz
Yesterday 10:13 PM
» Replies: 355
» Views: 45706
1.6 hdi lumpy cold start
Last Post: Zion
Yesterday 09:28 PM
» Replies: 52
» Views: 6901
Bypass heater matrix?
Last Post: Zion
Yesterday 09:11 PM
» Replies: 3
» Views: 663
newbie
Last Post: weldore
Yesterday 08:00 PM
» Replies: 2
» Views: 246
Peugeot partner 2.0 hdi 90, will a 406 2.0 hdi 1...
Last Post: Civvic
Yesterday 02:40 PM
» Replies: 1
» Views: 443

[-]
Recent Visitors
Locations of visitors to this page