fitting type b multifunction display

[dudarus1]

today i had a go at fitting the multifunction display from a peugeot 307. the display fits no problem plugged straight in and worked first time. problem is that the button on the wiper stalk i popped it off hoping to find the pcb board like i had read but mine doesnt have this its just a blank. will i need to swap out the comms 2000 unit for one with a button ?

thanks in advance

[cancunia]

Which part did you pop off, the small cap at the very end of the stalk, or the part that rotates to turn on the rear wiper?

Take a look at the links from the thread below, there are 2 types of wiper stalk, but both only need the small button right at the end. I have a spare COM2000 stalk assembly with wiper, lights & radio stalks. Strangely the small button at the end of the wiper stalk is missing :-). However, there's also a small button at the end of the lighting stalk that should work. PM me if you're interested.

http://www.berlingoforum.com/thread-14916.html